857-704 - Solid-state relay module; Nominal input voltage: 24 VDC; Output voltage range: 0 … 48 VDC; Limiting continuous current: 0.1 A; Yellow status indicator; Module width: 6 mm; gray
- Brand: Wago
- Product Code: 857-704
Description:
- Available Quantity: 0
$40.50
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Input voltage range (low level) | DC 0 … 10 V |
Input voltage range (high level) | DC 16.8 … 30 V |
Nominal input current at UN | 9 mA |
Load circuit
Circuit type | 2-wire connection |
Limiting continuous current | 0.1 A |
Nominal output voltage | DC 24 V |
Output voltage range | DC 0 … 48 V |
Voltage drop at output (max.) | ≤ DC 1 V |
Leakage current at rated voltage | ≤ 1 µA |
Switching current (min.) | 50 µA |
Turn-on time | ≤ 100 µs |
Turn-off time | ≤ 600 µs |
Switching frequency | ≤ 1 kHz |
Signaling
Status indicator | Yellow LED |
Safety and protection
Rated voltage | 300 |
Overvoltage category | III |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 3.51 kVrms |
Insulation type (control/load circuit) | Reinforced insulation |
Insulation type (between adjacent devices of the same type) | Reinforced insulation |
Insulation type (to adjacent devices of different types) | Basic insulation |
Protection type | IP20 |
Notes
Note | Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks. |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor; with insulated ferrule | 0.34 … 1.5 mm² / 22 … 16 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Physical data
Width | 6 mm / 0.236 inch |
Height | 94 mm / 3.701 inch |
Depth from upper-edge of DIN-rail | 81 mm / 3.189 inch |
Mechanical data
Mounting type | DIN-35 rail |
Mounting position | Horizontal (standing/lying); vertical |
Material data
Color | gray |
Weight | 30 |
Environmental requirements
Ambient temperature (operation at UN) | -20 … 60 °C |
Surrounding air temperature (storage) | -40 … +70 °C |
Processing temperature | -25 … +50 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 30 K) |
Relative humidity | 5 … 85 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61000-6-2 EN 61000-6-3 EN 61373 EN 61010-2-201 UL 508 |
Basic relay
WAGO Basic Relay | 858-164 |
Bid Text
857-704
857-704
Instruction Leaflet
Elektromechanical and Solid-State Relays/Optocouplers
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 857-704
CAE data
EPLAN Data Portal 857-704
WSCAD Universe 857-704
ZUKEN Portal 857-704
Compliance Search
Environmental Product Compliance 857-704