858-152 - Basic relay; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with gold contacts; with manual operation; Module width: 22 mm; Module height: 25 mm
- Brand: Wago
- Product Code: 858-152
- Available Quantity: 0
$14.38
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Nominal input current at UN | 36.9 mA |
Load circuit
Number of changeover contacts | 4 |
Contact material (relay) | AgCe + Au |
Limiting continuous current | 5 A |
Inrush current (resistive) max. | (AC) 15 A / 4 s |
Switching voltage (max.) | AC 250 V |
Switching power (resistive) max. | AC 1250 VA; DC (see load limit curve) |
Recommended minimum load | 5 V / 1 mA / 50 mW |
Pull-in time (typ.) | 25 |
Drop-out time (typ.) | 25 |
Bounce time (typ.) | 4 |
Electrical life (NO; resistive load; 23 °C) | 100 x 103 switching operations |
Mechanical life | 20 x 106 switching operations |
Signaling
Status indicator | Red LED Mechanical |
Safety and protection
Dielectric strength (control/load circuit) (AC, 1 min) | 1.5 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Dielectric strength (load/load circuit) (AC, 1 min) | 1.5 kVrms |
Protection type | IP20 |
Notes
Note | To prevent damaging the gold layer, 30 VDC switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life. |
Physical data
Width | 21.5 mm / 0.846 inch |
Height from the surface | 35 mm / 1.378 inch |
Depth | 28 mm / 1.102 inch |
Mechanical data
Mounting type | Pluggable module |
Material data
Weight | 35 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 70 °C |
Surrounding air temperature (storage) | -40 … +80 °C |
Standards and specifications
Standards/specifications | EN 61810-1 |