750-315/300-000 - Fieldbus Coupler MODBUS; RS-485; 115,2 kBd
- Brand: Wago
- Product Code: 750-315/300-000
Description: This fieldbus coupler connects the WAGO I/O System as a slave to the MODBUS fieldbus. The fieldbus coupler detects all connected I/O modules and creates a local process image. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit. The data of the analog modules is stored in the process image that is created automatically according to the order in which the modules are connected to the coupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte.
Description: This fieldbus coupler connects the WAGO I/O System as a slave to the MODBUS fieldbus. The fieldbus coupler detects all connected I/O modules and creates a local process image. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit. The data of the analog modules is stored in the process image that is created automatically according to the order in which the modules are connected to the coupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte.
- Available Quantity: 0
$807.20
Technical data
Communication | Modbus® RTU |
Number of fieldbus nodes on master (max.) | 247 |
Number of I/O points | 6,000 |
Baud rate | 150 Bd … 115.2 kBd |
Bus segment length (max.) | 1200 m |
Transmission medium | Shielded Cu cable 2 (4) x 0.25 mm² |
Number of modules per node (max.) | 64 |
Input and output process image (fieldbus) max. | 512 bytes/512 bytes |
Supply voltage (system) | 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection) |
Current consumption (5 V system supply) | 350 |
Total current (system supply) | 1,650 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts |
Input current (typ.) at nominal load (24 V) | 500 |
Power supply efficiency (typ.) at nominal load (24 V) | 87 |
Isolation | 500 V system/field |
Number of outgoing power jumper contacts | 3 |
Current carrying capacity (power jumper contacts) | 10 |
Connection data
Connection technology: communication/fieldbus | Modbus RTU: 1 x D-Sub 9 socket |
Connection technology: field supply | 6 x CAGE CLAMP® |
Connection technology: system supply | 2 x CAGE CLAMP® |
Connection technology: device configuration | 1 x Male connector; 4-pole |
Connection type 1 | System/field supply |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 50.5 mm / 1.988 inches |
Height | 100 mm / 3.937 inches |
Depth | 71.1 mm / 2.799 inches |
Depth from upper-edge of DIN-rail | 63.9 mm / 2.516 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 2.549 |
Weight | 183.2 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-3, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
MODBUS Fieldbus Coupler RTU
System Manual Series 750/753
Bid Text
750-315/300-000
750-315/300-000
ausschreiben.de 750-315/300-000
System Description
Use in Hazardous Environments
Overview on WAGO-I/O-SYSTEM 750 approvals
750/753 Series I/O-System ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Firmware
CAD data
2D/3D Models 750-315/300-000
CAE data
EPLAN Data Portal 750-315/300-000
WSCAD Universe 750-315/300-000
ZUKEN Portal 750-315/300-000
WSCAD Universe 750-315/300-000
EPLAN Data Portal 750-315/300-000
Compliance Search
Environmental Product Compliance 750-315/300-000