750-337/025-000 - Fieldbus Coupler CANopen; MCS; Ext. Temperature
- Brand: Wago
- Product Code: 750-337/025-000
Description: This fieldbus coupler connects the WAGO I/O System as a slave to the CANopen fieldbus. Data is transmitted via PDOs and SDOs. The fieldbus coupler detects all connected I/O modules and creates a local process image. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit. The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen bus to a control system for further processing. The process output data is sent via the CANopen bus. The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the coupler. The bits from the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte. All entries of the object directory can be mapped as required in the 32 Rx PDOs and 32 Tx PDOs. The complete input and output process image can be transmitted using SDOs. Spacer modules can be set via software.
Description: This fieldbus coupler connects the WAGO I/O System as a slave to the CANopen fieldbus. Data is transmitted via PDOs and SDOs. The fieldbus coupler detects all connected I/O modules and creates a local process image. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit. The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen bus to a control system for further processing. The process output data is sent via the CANopen bus. The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the coupler. The bits from the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte. All entries of the object directory can be mapped as required in the 32 Rx PDOs and 32 Tx PDOs. The complete input and output process image can be transmitted using SDOs. Spacer modules can be set via software.
- Available Quantity: 0
$708.90
Notes
Note | Note: Configuration files required (EDS)! |
Technical data
Communication | CANopen |
Number of fieldbus nodes on master (max.) | 110 |
Baud rate | 10 kBd … 1 MBd |
Bus segment length (max.) | 1000 m |
Transmission medium | Shielded Cu cable 3 x 0.25 mm² |
Number of modules per node (max.) | 64 |
Other CANopen features | NMT slave Minimum boot-up Variable PDO mapping Emergency message Life guarding Empty module configuration |
Number of PDOs | 32 Tx / 32 Rx |
Number of SDOs | 2 SDO servers |
COB ID distribution | SDO, standard |
Node ID distribution | DIP switch |
Communication profile | DS-301 V4.1 |
Device profile | DS-401 V2.0 Limit value monitoring Edge-triggered PDOs Configurable response in the event of an error |
Input and output process image (fieldbus) max. | 512 bytes/512 bytes |
Supply voltage (system) | 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection) |
Current consumption (5 V system supply) | 350 |
Total current (system supply) | 1,650 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts |
Input current (typ.) at nominal load (24 V) | 500 |
Power supply efficiency (typ.) at nominal load (24 V) | 87 |
Isolation | 500 V system/field |
Number of outgoing power jumper contacts | 3 |
Current carrying capacity (power jumper contacts) | 10 |
Connection data
Connection technology: communication/fieldbus | CANopen: 1 x Male connector; 5-pole |
Connection technology: field supply | 6 x CAGE CLAMP® |
Connection technology: system supply | 2 x CAGE CLAMP® |
Connection technology: device configuration | 1 x Male connector; 4-pole |
Connection type 1 | System/field supply |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 50.5 mm / 1.988 inches |
Height | 100 mm / 3.937 inches |
Depth | 71.1 mm / 2.799 inches |
Depth from upper-edge of DIN-rail | 63.9 mm / 2.516 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | - |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 2.847 |
Weight | 185 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | -20 … +60 °C |
Surrounding air temperature (storage) | -40 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Relative humidity (with condensation) | Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of −20 to +60 °C (except for wind-driven precipitation, water and ice formation) |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
CANopen Fieldbus Coupler, MCS
System Manual Series 750/753
Bid Text
750-337/025-000
750-337/025-000
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Firmware
0750-0337, Feldbuskoppler CANopen; MCS
CAE data
EPLAN Data Portal 750-337/025-000
WSCAD Universe 750-337/025-000
ZUKEN Portal 750-337/025-000
EPLAN Data Portal 750-337/025-000
WSCAD Universe 750-337/025-000
CAD data
2D/3D Models 750-337/025-000
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-337/025-000