750-347 - Fieldbus Coupler CANopen; MCS; ECO
- Brand: Wago
- Product Code: 750-347
Description: The ECO Fieldbus Coupler is designed for applications with a low data width in the process image. These are primarily applications that use digital process data or only low volumes of analog process data. The system supply is provided directly by the coupler. The field supply is provided via a separate supply module. The CANopen Fieldbus Coupler detects all connected I/O modules and creates a local process image. The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen bus to a control system for further processing. The process output data is sent via the CANopen bus. The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the coupler. The bits from the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte. All entries of the object directory can be mapped as required in the five Rx PDOs and five Tx PDOs. The complete input and output process image can be transmitted using SDOs. Spacer modules can be set via software.
Description: The ECO Fieldbus Coupler is designed for applications with a low data width in the process image. These are primarily applications that use digital process data or only low volumes of analog process data. The system supply is provided directly by the coupler. The field supply is provided via a separate supply module. The CANopen Fieldbus Coupler detects all connected I/O modules and creates a local process image. The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen bus to a control system for further processing. The process output data is sent via the CANopen bus. The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the coupler. The bits from the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte. All entries of the object directory can be mapped as required in the five Rx PDOs and five Tx PDOs. The complete input and output process image can be transmitted using SDOs. Spacer modules can be set via software.
- Available Quantity: 0
$427.60
Notes
Note | Note: Configuration files required (EDS)! |
Technical data
Communication | CANopen |
Number of fieldbus nodes on master (max.) | 110 |
Baud rate | 10 kBd … 1 MBd |
Bus segment length (max.) | 1000 m |
Transmission medium | Shielded Cu cable 3 x 0.25 mm² |
Number of modules per node (max.) | 64 |
Other CANopen features | NMT slave Minimum boot-up Variable PDO mapping Emergency message Life guarding |
Number of PDOs | 5 Tx / 5 Rx |
Number of SDOs | 1 SDO server |
COB ID distribution | SDO, standard |
Node ID distribution | DIP switch |
Communication profile | DS-301 V4.1 |
Device profile | DS-401 V2.0 Configurable response in the event of an error |
Input and output process image (fieldbus) max. | 32 bytes/32 bytes |
Supply voltage (system) | 24 VDC (-25 … +30 %); via pluggable connector |
Current consumption (5 V system supply) | 350 |
Total current (system supply) | 650 |
Input current (typ.) at nominal load (24 V) | 260 |
Power supply efficiency (typ.) at nominal load (24 V) | 80 |
Connection data
Connection technology: communication/fieldbus | CANopen: 1 x Male connector; 5-pole |
Connection technology: system supply | 4 x CAGE CLAMP® |
Connection technology: device configuration | 1 x Male connector; 4-pole |
Connection type 1 | System supply |
Solid conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Fine-stranded conductor | 0.08 … 1.5 mm² / 28 … 16 AWG |
Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
Note (conductor cross-section) | 14 AWG: THHN, THWN |
Physical data
Width | 49.5 mm / 1.949 inches |
Height | 96.8 mm / 3.811 inches |
Depth | 71.9 mm / 2.831 inches |
Depth from upper-edge of DIN-rail | 64.7 mm / 2.547 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 3.298 |
Weight | 135 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-4, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
CANopen Fieldbus Coupler ECO
System Manual Series 750/753
Bid Text
750-347
750-347
System Description
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note CoDeSys 2.3
PERSPECTO Control Panel als CANopen Master (a762011)
Using the Profile401_1 library for data exchange between WAGO CANopen devices (a112600)
Firmware
0750-0347, Feldbuskoppler CANopen; MCS
CAD data
2D/3D Models 750-347
CAE data
EPLAN Data Portal 750-347
ZUKEN Portal 750-347
WSCAD Universe 750-347
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Device Description File
750-914; EDS file for CANopen / 750, 752 and 767 Series
Compliance Search
Environmental Product Compliance 750-347