750-482/000-001 - 2-channel analog input; 4 … 20 mA HART; NAMUR NE 43
- Brand: Wago
- Product Code: 750-482/000-001
Description: This analog input module powers field-side signal conditioners and transmits electrically isolated analog signals to the bus system. The 24 V field supply is derived from the modules power jumper contacts. The shield directly connects to the DIN-rail. At approximately 25 mA, overload protection switches the measurement input to a high-resistance state. Once normal operating conditions resume, the measurement input will automatically switch back. This module powers 2-wire signal conditioners without dedicated power supply. Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image of the coupler or controller (parameterizable). For HART communication with connected intelligent HART field devices, the HART protocol can be mapped in the cyclic process image of the coupler or controller (parameterizable). FDT/DTM device drivers are available for select (programmable) fieldbus couplers, allowing HART tool routing to the connected HART device. Note: The analog output module must only be operated with a field-side power supply filter equipped with overvoltage (surge) protection (Item No. 750-624/020-001)!
Description: This analog input module powers field-side signal conditioners and transmits electrically isolated analog signals to the bus system. The 24 V field supply is derived from the modules power jumper contacts. The shield directly connects to the DIN-rail. At approximately 25 mA, overload protection switches the measurement input to a high-resistance state. Once normal operating conditions resume, the measurement input will automatically switch back. This module powers 2-wire signal conditioners without dedicated power supply. Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image of the coupler or controller (parameterizable). For HART communication with connected intelligent HART field devices, the HART protocol can be mapped in the cyclic process image of the coupler or controller (parameterizable). FDT/DTM device drivers are available for select (programmable) fieldbus couplers, allowing HART tool routing to the connected HART device. Note: The analog output module must only be operated with a field-side power supply filter equipped with overvoltage (surge) protection (Item No. 750-624/020-001)!
- Available Quantity: 0
$919.20
Technical data
Number of analog inputs | 2 |
Number of Channels | 2 |
Signal type | Current |
Signal type (current) | 3.6 … 21 mADC |
Sensor connection | 2 x (2-wire) |
Input filter | parameterizable |
Input filter: parametrizable (channel by channel) | yes |
Input voltage (max.) | 24 V |
Input voltage drop | (I meas < 28 mA): non-linear, overload protected U = 1.0 V + 300 Ω x I meas |
Signal characteristics | Single-ended |
Diagnostics | Wire break, short circuit, measurement range overflow/underflow |
Resolution [bit] | 12 |
Data width | 2 x 2-byte data; 2 x 2-byte data + 2n x 4-byte data (n = number of dynamic variables); 2 x 2-byte data + 6-byte mailbox |
Overvoltage protection | 30 V, reverse polarity protected |
Conversion time (typ. ≤) | 315 |
Measurement error, reference temperature | 25 |
Measurement error, deviation max (upper-range value) ≤± | 0.2 |
Temperature error max. (upper-range value) ≤± | 0.01 |
Line break detection | I meas < 1.0 mA |
Short-circuit detection | I meas > 23 mA |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 25 |
Supply voltage (field) | 24 VDC; via power jumper contacts (power supply via blade contact; transmission via spring contact) |
HART devices per channel | 1 device (single-drop, no multi-drop) |
HART modems per channel | 1 modem (no multiplex) |
Isolation | 300 VAC system/supply |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 16 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 24 mm / 0.945 inches |
Height | 100 mm / 3.937 inches |
Depth | 67.8 mm / 2.669 inches |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.971 |
Weight | 94.2 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
2-Channel Analog Input, 4-20mA, HART NAMUR NE43, single ended
System Manual Series 750/753
Bid Text
750-482/000-001
750-482/000-001
System Description
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Application Note CoDeSys 2.3
HART Tool Routing via PROFIBUS with 750-833 and 750-333 (a116140)
HART Tool Routing via ETHERNET with
750-820x/750-88x and CODESYS 2.3 (a116120)
Application Note e!COCKPIT
HART Tool Routing via ETHERNET with 750-820x and e!RUNTIME (a116130)
CAD data
2D/3D Models 750-482/000-001
CAE data
EPLAN Data Portal 750-482/000-001
ZUKEN Portal 750-482/000-001
Compliance Search
Environmental Product Compliance 750-482/000-001