750-527 - 4-channel digital output; 30 VAC/VDC; 2.0 A; Solid-state
- Brand: Wago
- Product Code: 750-527
Description: This digital output module transmits control signals from the automation device to the connected actuators. The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required. The control of the semiconductor outputs is galvanically isolated from the internal system voltage. The required load voltage is supplied via the power contacts. The signal states for controlling the four digital outputs are indicated by status LEDs. Notice: A suitable supply module (e.g., 750-612) must be provided for AC operation or when using DC voltages >31.2 V!
Description: This digital output module transmits control signals from the automation device to the connected actuators. The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required. The control of the semiconductor outputs is galvanically isolated from the internal system voltage. The required load voltage is supplied via the power contacts. The signal states for controlling the four digital outputs are indicated by status LEDs. Notice: A suitable supply module (e.g., 750-612) must be provided for AC operation or when using DC voltages >31.2 V!
- Available Quantity: 0
$141.50
Technical data
Number of digital outputs | 4 |
Number of Channels | 4 |
Signal type | Voltage |
Signal type (voltage) | 30 VAC/DC |
Actuator connection | 4 x (2-wire) |
Output characteristic | high-side switching |
Output current per channel | 2 |
Output current (module) | 8 |
Output current | requires external fuses |
Switching frequency (max.) | 1 Hz |
Load type | Resistive; inductive (Limit induction voltage peaks externally.) |
Contact resistance (max.) | 0.04 |
Contact resistance (typ.) | 0.02 |
Delay time T_on from 0 to 1 | 1000 |
Delay time T_off from 1 to 0 | 20000 |
Inductive load switch-off energy dissipation (max.) | 0.18 |
Output data width (internal) max. | 4 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 57 |
Supply voltage (field) | 30 VSELV AC/DC; via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 0 |
Isolation | 500 V system/field |
Indicators | LED (A, B, E, F) green: Status DO 1 … DO 4 |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 10 |
Overvoltage category | II |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Fixed |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.954 |
Weight | 50 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Protection class | III |
Pollution degree (5) | 2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | 4g per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-1, -2; marine applications |
EMC emission of interference | per EN 61000-6-3, -4; marine applications |
Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
4DO AC/DC 30 V; SSR
System Manual Series 750/753
Bid Text
750-527
750-527
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
750/753 Series I/O-System ‒ General Product Information
Use in Hazardous Environments
Overview on WAGO-I/O-SYSTEM 750 approvals
CAD data
2D/3D Models 750-527
CAE data
ZUKEN Portal 750-527
Compliance Search
Environmental Product Compliance 750-527