750-626/020-002 - Supply Filter; 24 VDC; Higher isolation; Ground Fault Diagnostics
- Brand: Wago
- Product Code: 750-626/020-002
Description: The WAGO I/O System 750 can also be used in marine applications and onshore/offshore installations (e.g., platforms, loading facilities). This is possible via certification under the standards of leading agencies such as Germanischer Lloyd and Lloyds Register. This filter module ensures proper (certified) system operation. The module protects against high-energy disturbances on DC supply lines due to switching overvoltages caused by inductive loads. It contains a filter for the system supply and transient protection for both system and field supply. It is streamlined for use in systems with insulation monitoring and also offers the possibility of a ground fault test. Indicators: • LED (green): Power supply is available • LED (red): Ground fault Ground fault diagnostics (response values): Pre-alarm 50 kΩ (±15 %) Main alarm 25 kΩ (±15 %) Hysteresis (typ.) 25 … 30 % Response time ≤ 5 s (typ. 2.5 s) Internal resistance DC (test circuit) >10 MΩ (test inactive), >90 kΩ (test active) Test current ≤180 μA (RF=0 Ω) Permissible system leakage capacitance ≤ 2 μF
Description: The WAGO I/O System 750 can also be used in marine applications and onshore/offshore installations (e.g., platforms, loading facilities). This is possible via certification under the standards of leading agencies such as Germanischer Lloyd and Lloyds Register. This filter module ensures proper (certified) system operation. The module protects against high-energy disturbances on DC supply lines due to switching overvoltages caused by inductive loads. It contains a filter for the system supply and transient protection for both system and field supply. It is streamlined for use in systems with insulation monitoring and also offers the possibility of a ground fault test. Indicators: • LED (green): Power supply is available • LED (red): Ground fault Ground fault diagnostics (response values): Pre-alarm 50 kΩ (±15 %) Main alarm 25 kΩ (±15 %) Hysteresis (typ.) 25 … 30 % Response time ≤ 5 s (typ. 2.5 s) Internal resistance DC (test circuit) >10 MΩ (test inactive), >90 kΩ (test active) Test current ≤180 μA (RF=0 Ω) Permissible system leakage capacitance ≤ 2 μF
- Available Quantity: 0
$190.90
Technical data
Signal type | Voltage |
Signal type (voltage) | 24 VDC |
Data width | 8-bit input; 8-bit output |
Supply voltage (system) | 24 VDC (-25 … +30 %) |
Current consumption (5 V system supply) | 29 |
Supply voltage (field) | 24 VSELV DC (-25 … +30 %); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact) |
Current consumption, field supply (module with no external load) | 16 |
Isolation | 300 VDC (limited by a transient protection device) system/field |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity (power jumper contacts) | 10 |
Connection data
Connection technology: field supply | 4 x CAGE CLAMP® |
Connection technology: system supply | 4 x CAGE CLAMP® |
Connection type 1 | System/field supply |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69.8 mm / 2.748 inches |
Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 0.954 |
Weight | 52.1 |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2, marine applications |
EMC emission of interference | per EN 61000-6-3, marine applications |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Manual
System Manual WAGO I/O System 750 / 753
Power Supply Filter; 24 VDC; Higher Isolation; Ground Fault Diagnostics
System Manual Series 750/753
Bid Text
750-626/020-002
System Description
750/753 Series I/O-System ‒ General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
CAE data
EPLAN Data Portal 750-626/020-002
Compliance Search
Environmental Product Compliance 750-626/020-002