750-670 - Stepper Controller; RS-422/24 VDC; 20 mA
- Brand: Wago
- Product Code: 750-670
Description: The 750-670 Module is an intelligent stepper controller used to control different drive power sections with pulse/direction interface or incremental encoder input. Both RS-422 and 24 V or 20 mA interfaces are available. Due to the high output frequency, stepper output stages with smooth microstepping resolution can be used. In addition, this module can also be used as a high-precision frequency or pulse width modulator. Two configurable inputs for start/stop, limit switches, reference cams, jog/tip, etc., are directly processed by the internal software without delay. Versatile functions, such as positioning with different acceleration slopes, command tables, camshaft controller, auto referencing and other event-dependent properties provide this controller with a wide spectrum of possible uses. The programmers interface is the same for all WAGO Stepper Controllers. Additional operating modes: Pulse width modulation Frequency generator Single-shot mode
Description: The 750-670 Module is an intelligent stepper controller used to control different drive power sections with pulse/direction interface or incremental encoder input. Both RS-422 and 24 V or 20 mA interfaces are available. Due to the high output frequency, stepper output stages with smooth microstepping resolution can be used. In addition, this module can also be used as a high-precision frequency or pulse width modulator. Two configurable inputs for start/stop, limit switches, reference cams, jog/tip, etc., are directly processed by the internal software without delay. Versatile functions, such as positioning with different acceleration slopes, command tables, camshaft controller, auto referencing and other event-dependent properties provide this controller with a wide spectrum of possible uses. The programmers interface is the same for all WAGO Stepper Controllers. Additional operating modes: Pulse width modulation Frequency generator Single-shot mode
- Available Quantity: 0
$496.20
Technical data
Device-specific | Operating modes: Individual positioning, reference run, jog, tip, command tables, PWM |
Number of digital inputs | 2 |
Number of outputs | 1 channel (2 differential outputs A1, A2, B1, B2) |
Input filter | 100 µs, software filter can be connected |
Input current (typ.) | 2.8 mA |
Output current per channel | 0.03 |
Output current | short-circuit-protected |
Load type | RS-422, TTL, optocoupler |
Voltage range for signal (0) | −3 … +5 VDC |
Voltage range for signal (1) | 15 … 30 VDC |
Signal voltage | 5 VDC (internal), 5 … 24 VDC (external) |
Signal frequency (min.) | 0 |
Signal frequency (max.) | 500000 |
Resolution | 15 bits + 16 bit prescaler |
Stepper resolution | 23 bits + sign bit |
Duty cycle | 50 % (in stepper motor mode) |
Data width | 12-byte input/output |
Functions | Absolute/relative positioning, setpoint change on the fly, rotary axis, etc. |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 98 |
Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 67.8 mm / 2.669 inches |
Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.123 |
Weight | 49.9 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Manual
System Manual WAGO I/O System 750 / 753
Stepper Controller RS-422 / 24V / 20mA
System Manual Series 750/753
Bid Text
750-670
750-670
Additional Information
Disposal; Electrical and electronic equipment, Packaging
System Description
Overview on WAGO-I/O-SYSTEM 750 approvals
Use in Hazardous Environments
750/753 Series I/O-System ‒ General Product Information
Application Note CoDeSys 2.3
Nutzung der Bibliothek Stepper_02 für die Module 750-670,750-671 (a114900)
Application note SIEMENS
Using stepper modules with TIA Portal (a114904)
Benutzung der Stepper Module 750-670,750-671,750-672,750-673 mit Siemens Step 7 (a114903)
Application Note e!COCKPIT
e!COCKPIT Application Note WagoAppStepper
Library
Stepper_03.lib
Function blocks for the stepper modules 750-670 and 750-671
CAD data
2D/3D Models 750-670
CAE data
EPLAN Data Portal 750-670
WSCAD Universe 750-670
ZUKEN Portal 750-670
Device Driver
WAGO USB Service Kabel Treiber / Serie 750 und 857
Compliance Search
Environmental Product Compliance 750-670