DRT2-OD32B-1 - DRT2 DeviceNet Smart Slave I/O
- Brand: Omron
- Product Code: DRT2-OD32B-1
Description: Compact IP 20 rated DeviceNet I/O units with extensive diagnostic functions. Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ PLCs and NS operator terminals.
Description: Compact IP 20 rated DeviceNet I/O units with extensive diagnostic functions. Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ PLCs and NS operator terminals.
- Available Quantity: 0
$534.00
Overview Software Applications
- Compact size IP20 housing
- Expandable digital I/Os
- Built-in diagnostics and preventive maintenance functions
- Detachable I/O terminal blocks
- Analog I/O with data pre-processing and alarm functions
Smart features
All Omron I/O units have built-in Smart Features that help to:
- Reduce engineering time
- Plan preventative maintainance
- Increase your productivity
Take a look at one of the features below for a demonstration.
Calendar
Smart I/O can store the last date on which you performed maintenance. A better overview will help you plan maintenance more efficiently.
Counter
Smart I/O units all keep track of duration and number of operations, to help you plan machine maintenance. Timely warnings to inspect and adjust the machine will minimise unplanned downtime.
Volt meter
Smart I/O monitors its own supply voltage, and will warn you if the voltage is out of safe range - e.g. due to damaged cable or poor connection.
Stopwatch
Smart I/O can measure delays between two I/O signals with millisecond accuracy. When your preset limit is exceeded, Smart I/O will warn you that wear or lack of lubrication has reduced machine performance.
Calculator
Smart Analog I/O performs data pre-processing to help you reduce PLC programming. Scaling and alarms, and even totalising or rate-of-change calculations are handled inside the unit.
- #### CX-One / CX-One LiteCX-One software allows users to build, configure and program a host of devices such as PLCs, HMIs and motion-control systems and networks using just one software package with one installation and license number. This greatly reduces the complexity of the configuration and allows automation systems to be programmed or configured with minimal training.
Specifications
Input Off Time | 1.5 ms |
Terminal Type | MIL Connector |
Output Type | DC PNP |
Number of Output Points | 32 |
Number of Outputs Per Common | 32 |
Output Voltage | 24 VDC |
Output Current Per Point | 500 mA |
Output Current Per Common | 4.0 A |
Output On Time | 0.5 ms |
Output Off Time | 1.5 ms |
Mounting | Circuit Board |
DataSheet
CAD