857-359 - Relay module; Nominal input voltage: 24 … 230 V AC/DC; 1 changeover contact; Limiting continuous current: 6 A; Yellow status indicator; Module width: 6 mm

Nominal input voltage U_N

AC/DC 24 … 230 V

Input voltage range

-30 … +10 %

Nominal input current at U_N

3.5 mA (230 VAC); 20 mA (24 VDC)

Nominal frequency range (input voltage)

50 … 60 HzAC / 0 HzDC

Number of changeover contacts

1

Contact material (relay)

AgSnO₂

Limiting continuous current

6 A

Inrush current (resistive) max.

(AC) 20 A / 0.02 s

Switching voltage (max.)

AC 250 V

Switching power (resistive) max.

AC 1500 VA; DC (see load limit curve)

Switching capacity

AC-15: 3 A / AC 250 V; DC-13: 2 A / DC 24 V

Recommended minimum load

10 V / 10 mA; 24 V / 1 mA

Pull-in time (typ.)

15

Drop-out time (typ.)

25

Bounce time (typ.)

3.5

Electrical life (NO; resistive load; 23 °C)

50 x 10³ switching operations

Mechanical life

5 x 10⁶ switching operations

Switching frequency with/without load (max.)

6 min^-1 / 60 min^-1

Status indicator

Yellow LED

Rated voltage

300

Rated surge voltage

4

Type of circuits

Mains circuits

Overvoltage category

III

Pollution degree

2

Dielectric strength (control/load circuit) (AC, 1 min)

3.51 kVrms

Dielectric strength (open contact) (AC, 1 min)

1 kVrms

Insulation type (control/load circuit)

Reinforced insulation (safe isolation)

Insulation type (between adjacent devices of the same type)

Double insulation (safe isolation)

Insulation type (to adjacent devices of different types)

Basic insulation

Safety information 1

Adjacent devices are devices of the same design (series) that are arranged next to each other with the same orientation on the mounting rail. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.

Protection type

IP20