857-734 - Solid-state relay module; Nominal input voltage: 24 VDC; Output voltage range: 0 … 30 VDC; Limiting continuous current: 8 A; Module width: 6 mm
- Brand: Wago
- Product Code: 857-734
Description:
- Available Quantity: 0
$61.95
Technical data
Control circuit
Nominal input voltage UN | DC 24 V (SELV) |
Input voltage range (low level) | DC 0 … 4 V |
Input voltage range (high level) | DC 16.8 … 30 V |
Nominal input current at UN | 12 mA |
Power loss (max.) Pl (max.) | 0.3 W |
Load circuit
Circuit type | 2-wire connection |
Limiting continuous current | 8 A; 6 A (UL) |
Nominal output voltage | DC 24 V (SELV) |
Output voltage range | DC 1 … 30 V |
Voltage drop at output (max.) | ≤ DC 0.8 V |
Leakage current at rated voltage | ≤ 1 µA |
Switching current (min.) | 10 mA |
Turn-on time | ≤ 60 µs |
Turn-off time | ≤ 250 µs |
Switching frequency | ≤ 500 Hz |
Signaling
Status indicator | Yellow LED |
Safety and protection
Rated voltage | 300 |
Overvoltage category | II |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 3.51 kVrms |
Insulation type (control/load circuit) | None |
Insulation type (between adjacent devices of the same type) | Double insulation (safe isolation) |
Insulation type (to adjacent devices of different types) | Basic insulation |
Safety information 1 | Adjacent devices are devices of the same design (series) that are arranged next to each other with the same orientation on the mounting rail. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements. |
Protection type | IP20 |
Notes
Safety information 1 | Adjacent devices are devices of the same design (series) that are arranged next to each other with the same orientation on the mounting rail. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements. |
Note | Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks. |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor; with insulated ferrule | 0.34 … 1.5 mm² / 22 … 16 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Physical data
Width | 6 mm / 0.236 inch |
Height | 94 mm / 3.701 inch |
Depth from upper-edge of DIN-rail | 81 mm / 3.189 inch |
Mechanical data
Mounting type | DIN-35 rail |
Mounting position | Horizontal (standing/lying); vertical |
Material data
Weight | 29.1 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 70 °C |
Ambient temperature UL (operation at UN) | -25 … 60 °C |
Surrounding air temperature (storage) | -40 … +70 °C |
Processing temperature | -25 … +50 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 30 K) |
Relative humidity | 5 … 85 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61010-2-201 EN 61373 EN 61000-6-2 EN 61000-6-3 EN 50121-3-2 EN 50121-4 |
Basic relay
WAGO Basic Relay | 857-181 |
Bid Text
857-734
857-734
Instruction Leaflet
Elektromechanical and Solid-State Relays/Optocouplers
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 857-734
CAE data
ZUKEN Portal 857-734
Compliance Search
Environmental Product Compliance 857-734