750-8208/025-001 - Controller PFC200; 2 x ETHERNET, RS-232/-485, CAN, CANopen, PROFIBUS-Master; Telecontrol technology; Ext. Temperature

Communication

PROFIBUS

CANopen

Modbus (TCP, UDP)

ETHERNET

Modbus® RTU

RS-232 serial interface

RS-485 serial interface

MQTT

Telecontrol protocols

ETHERNET protocols

DHCP

DNS

NTP

FTP

FTPS

SNMP

HTTP

HTTPS

SSH

Telecontrol protocols

IEC 60870-5-101/-103/-104

IEC 61400-25

IEC 61850-7

DNP3

Visualization

Web-Visu

Web Visu

Operating system

Real-time Linux (with RT-Preempt patch)

CPU

Cortex A8; 600 MHz

Programming languages per IEC 61131-3

Instruction List (IL)

Ladder Diagram (LD)

Function Block Diagram (FBD), Continuous Function Chart (CFC)

Structured Text (ST)

Sequential Function Chart (SFC)

Programming environment

WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)

Configuration options

WAGO-I/O-CHECK

Web-Based Management

Baud rate (communication/fieldbus 1)

10/100 Mbit/s

Baud rate

ETHERNET: 10/100 Mbit/s

Transmission medium (communication/fieldbus)

ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length

Main memory (RAM)

256

Internal memory (flash)

256

Non-volatile hardware memory

128

Program memory

16 MB

Data memory

64 MB

Non-volatile software memory

128

Type of memory card

SD card

Memory card slot

Push-push mechanism; Cover lid (sealable)

Number of modules per node (max.)

250

Number of modules without a bus extension (max.)

64

Input and output process image (internal) max.

1000 words/1000 words

Input and output process image (Modbus®) max.

CODESYS V2: 1000 words/1000 words

Input and output process image (PROFIBUS) max.

5000 bytes/5000 bytes

Input and output process image (CAN) max.

2000 words/2000 words

Indicators

LED (SYS, RUN, I/O, CAN, BF, DIA, U1 … U4) red/green/orange: Status system, program, internal data bus, CANopen, PROFIBUS, PROFIBUS diagnostics, status programmable by user (can be used via CODESYS library); LED (A, B) green: System power supply status, field supply

Supply voltage (system)

24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP^® connection)

Input current (typ.) at nominal load (24 V)

670

Total current (system supply)

1,700

Supply voltage (field)

24 VDC (-25 … +30 %); via power jumper contacts

Current carrying capacity (power jumper contacts)

10

Number of outgoing power jumper contacts

3

Isolation

500 V system/field

Connection technology: communication/fieldbus

PROFIBUS: 1 x D-sub 9 socket; CANopen: 1 x D-sub 9 plug; Modbus TCP/UDP: 2 x RJ-45; Modbus RTU: 1 x D-sub 9 socket; RS-232 serial interface: 1 x D-sub 9 socket; RS-485 interface: 1 x D-sub 9 socket; Telecontrol protocol IEC 60870-5-101/-103: 1 x D-sub 9 socket; Telecontrol protocol IEC 60870-5-104: 1 x RJ-45; Telecontrol protocol IEC 61850: 1 x RJ-45; Telecontrol protocol DNP3: 1 x RJ-45 or D-sub 9 socket

Connection technology: system supply

2 x CAGE CLAMP^®

Connection technology: field supply

6 x CAGE CLAMP^®

Connection type 1

System/field supply

Solid conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Strip length

8 … 9 mm / 0.31 … 0.35 inches

Connection technology: device configuration

1 x Male connector; 4-pole

Width

112 mm / 4.409 inches

Height

100 mm / 3.937 inches

Depth

71.9 mm / 2.831 inches

Depth from upper-edge of DIN-rail

64.7 mm / 2.547 inches

Weight

263.7

Color

light gray

Housing material

Polycarbonate; polyamide 6.6

Conformity marking

CE

Ambient temperature (operation)

-20 … +60 °C

Surrounding air temperature (storage)

-40 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Operating altitude

without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)

Relative humidity (without condensation)

95

Relative humidity (with condensation)

Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of −20  to +60 °C (except for wind-driven precipitation, water and ice formation)

Mounting position

any

Mounting type

DIN-35 rail

Vibration resistance

per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

per EN 61000-6-2, marine applications

EMC emission of interference

per EN 61000-6-3, marine applications

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Fire load

2.855

Permissible pollutant concentration H₂S at a relative humidity < 75%

10

Permissible pollutant concentration SO ₂ at a relative humidity < 75%

25