751-9301 - Compact Controller 100; 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485; 2 x ETHERNET; SD

Communication

RS-485 interface

Modbus (TCP, UDP)

Modbus® RTU

RS-485 serial interface

ETHERNET protocols

DHCP

DNS

NTP

FTP

FTPS

SNMP

HTTP

HTTPS

SSH

Visualization

Web-Visu

Web Visu

Operating system

Real-time Linux (with RT-Preempt patch)

CPU

Cortex A7; 650 MHz

Programming languages per IEC 61131-3

Instruction List (IL)

Ladder Diagram (LD)

Function Block Diagram (FBD), Continuous Function Chart (CFC)

Structured Text (ST)

Sequential Function Chart (SFC)

Programming environment

CODESYS V3.5

Configuration options

CODESYS V3.5

ETHERNET Settings

Web-Based Management

Baud rate (communication/fieldbus 1)

10/100 Mbit/s

Baud rate

ETHERNET: 10/100 Mbit/s

Transmission medium (communication/fieldbus)

ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length

Main memory (RAM)

512

Internal memory (flash)

4096

Non-volatile hardware memory

128

Program memory

32 MB

Data memory

128 MB

Non-volatile software memory

128.

Type of memory card

microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)

Memory card slot

Push-push mechanism

Indicators

LED (SYS, RUN), red/green: Status of system; LED (USR) red/green: User programmable status (can be used via CODESYS library); LED (SD) orange: Status of µSD; LED (LNK/ACT) green: Network connection via ports 1 … 2; LED (DI1 … 8) green: Status of inputs; LED (DO1 … 4) green: Status of outputs

Controls

Operating mode switch (RUN, STOP, RESET); reset button

Supply voltage (system)

24 VDC (-15 … +20 %); via pluggable connector (picoMAX^® 3.5; Push-in CAGE CLAMP^® connection)

Supply voltage (field)

24 VDC (-15 … +20 %); via pluggable connector (picoMAX^® 3.5; Push-in CAGE CLAMP^® connection)

Current consumption, field supply (module with no external load)

2000

Isolation

1250 V (DC 1 min., between system and field level)

Number of digital inputs

8

Input characteristic

Type 3 (per EN 61131-2)

Number of digital outputs

4

Output current (per channel)

500 mA (DC)

Output current

Short-circuit-protected

Signal type

Voltage

Resistance measurement

Signal type (voltage)

0 … 10 VDC

Number of analog inputs

2

Resolution of analog inputs

16

Number of analog outputs

2

Resolution of analog outputs

12

Load impedance (voltage output)

≥ 5 kΩ

Number of measurement inputs

2

Temperature range

−60 °C … 350 °C, PT1000, Ni1000

Connection technology: communication/fieldbus

Modbus TCP/UDP: 2 x RJ-45; RS-485 interface: 1 x Female connector, 4-pole; Push-in CAGE CLAMP^®

Connection technology: system supply

1 x Female connector, 2-pole; Push-in CAGE CLAMP^®

Connection technology: field supply

2 x Female connector, 10-pole; Push-in CAGE CLAMP^®

Solid conductor

0.2 … 1.5 mm² / 24 … 14 AWG

Fine-stranded conductor

0.2 … 1.5 mm² / 24 … 14 AWG

Strip length

8 … 9 mm / 0.31 … 0.35 inch

Width

108 mm / 4.252 inch

Height

90 mm / 3.543 inch

Depth from upper-edge of DIN-rail

55 mm / 2.165 inch

Weight

348

Housing material

Polycarbonate, polyamid

Conformity marking

CE; UKCA

Ambient temperature (operation)

-25 … +60 °C

Surrounding air temperature (storage)

-40 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Protection class

II

Operating altitude

0 … 2000 m / 0 … 6562 ft

Relative humidity (without condensation)

95

Mounting position

Any

Mounting type

DIN-35 rail

Vibration resistance

1g per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

Per EN 61000-6-2

EMC emission of interference

Per EN 61000-6-3