Industrial Control

This PROFIsafe Module (75x-662/000-003) connects to potential-free emergency stop buttons with conta..

The EtherCAT® Fieldbus Coupler connects EtherCAT® to the modular WAGO I/O System. The fieldbus coupl..

An end module must be snapped onto the assembly at the end of a fieldbus node. In addition, the 8 CA..

The Modbus TCP/UDP Fieldbus Coupler connects ETHERNET to the modular WAGO I/O System. The fieldbus c..

..

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O Syst..

The CANopen Controller combines control functionality, I/O interface and fieldbus in one device. App..

The 750-640 RTC Module provides the higher-level control system with the actual time. The time is bu..

This digital output module transmits control signals from the automation device to the connected act..

..

In conjunction with the WAGO I/O System, the ETHERNET Controller serves ETHERNET networks requiring ..

..

..

The WAGO‐I/O-SYSTEM 750 XTR can also be used in shipbuilding applications and onshore/offshore insta..

This analog input module directly connects to resistors for resistance measurement from 10R to 5k0. ..

This digital input module is a 2-wire device featuring eight channels in a width of just 12 mm (0.47..

The analog input module processes AC and DC currents within a range of 0 to 5 A (rms). The maximum c..

This analog input module directly connects to Pt resistance sensors. Two-wire sensors can be connect..

The PFC200 Controller is a compact PLC for the modular WAGO I/O System. Besides network and fieldbus..

This digital input module receives control signals from field devices (e.g., sensors). The module fe..

..

This supply module provides the I/O modules with the corresponding supply potential. The maximum cur..

Short description: This component terminal block with surge suppression device, end plate and direct..

Short description: This component terminal block with surge suppression device and end plate is equi..

The CAN Gateway supports CAN Layer 2, while meeting CAN specifications 2.0A (11-bit identifier) and ..