231-169/001-000/105-604/997-409 - Male header; 9-pole; THR; 1.2 x 1.2 mm solder pin; straight; pin spacing 5 mm; in tape-and-reel packaging; black
- Brand: Wago
- Product Code: 231-169/001-000/105-604/997-409
Description: THR male headers for reflow soldering in SMT applications Available in tape-and-reel packaging for automated pick-and-place PCB assembly 1.2 x 1.2 mm solder pins allow nominal current up to 16 A, enhancing stability of shorter headers Also available in bulk packaging for manual placement Male headers may be mounted horizontally or vertically With coding fingers
Description: THR male headers for reflow soldering in SMT applications Available in tape-and-reel packaging for automated pick-and-place PCB assembly 1.2 x 1.2 mm solder pins allow nominal current up to 16 A, enhancing stability of shorter headers Also available in bulk packaging for manual placement Male headers may be mounted horizontally or vertically With coding fingers
- Available Quantity: 0
$4.37
Electrical data
IEC Approvals
Ratings per | IEC/EN 60664-1 |
Rated voltage (III / 3) | 250 |
Rated impulse voltage (III/3) | 4 |
Rated voltage (III/2) | 320 |
Rated impulse voltage (III/2) | 4 |
Nominal voltage (II/2) | 630 |
Rated surge voltage (II/2) | 4 |
Rated current | 16 |
Legend (ratings) | (III / 2) ≙ Overvoltage category III / Pollution degree 2 |
UL Approvals
Approvals per | UL 1059 |
Rated voltage UL (Use Group B) | 300 |
Rated current UL (Use Group B) | 10 |
Rated voltage UL (Use Group D) | 300 |
Rated current UL (Use Group D) | 10 |
Ratings per UL
Rated voltage (UL 1977) | 600 |
Rated current UL 1977 | 15 |
CSA Approvals
Approvals per | CSA |
Rated voltage CSA (Use Group B) | 300 |
Rated current CSA (Use Group B) | 10 |
Rated voltage CSA (Use Group D) | 300 |
Rated current CSA (Use Group D) | 10 |
Notes
Safety information 1 | The MCS – MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. |
Variants: | Other pole numbers Gold-plated or partially gold-plated contact surfaces Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/. |
Connection data
Total number of potentials | 9 |
Number of connection types | 1 |
Number of levels | 1 |
Physical data
Pin spacing | 5 mm / 0.197 inches |
Width | 48.2 mm / 1.898 inches |
Height | 14.4 mm / 0.567 inches |
Height from the surface | 12 mm / 0.472 inches |
Depth | 8.4 mm / 0.331 inches |
Solder pin length | 2.4 |
Solder pin dimensions | 1.2 x 1.2 mm |
Plated through-hole diameter (THR) | 1.7 (+0.1) mm |
Reel diameter of tape-and-reel packaging | 330 |
Tape width | 88 |
Mechanical data
Variable coding | Yes |
Plug-in connection
Contact type (pluggable connector) | Male connector/plug |
Connector (connection type) | for PCB |
Mismating protection | No |
Mating direction to the PCB | 90 |
Locking of plug-in connection | none |
PCB contact
PCB Contact | THR |
Solder pin arrangement | over the entire male connector (in-line) |
Number of solder pins per potential | 1 |
Material data
Note (material data) | |
Color | black |
Material group | I |
Insulation material | Polyphthalamide (PPA GF) |
Flammability class per UL94 | V0 |
Contact material | Electrolytic copper (ECu) |
Contact plating | Tin |
Fire load | 0.068 |
Weight | 2.9 |
Environmental requirements
Limit temperature range | -60 … +100 °C |
Additional Information
Technical Section
CAD data
2D/3D Models 231-169/001-000/105-604/997-409
Compliance Search
Environmental Product Compliance 231-169/001-000/105-604/997-409