231-184/001-000 - Male header; 24-pole; THT; 1.2 x 1.2 mm solder pin; straight; pin spacing 5 mm; gray
- Brand: Wago
- Product Code: 231-184/001-000
Description: Horizontal or vertical PCB mounting via straight or angled solder pins 1.2 x 1.2 mm solder pins allow nominal current up to 16 A, enhancing stability of shorter headers With coding fingers
Description: Horizontal or vertical PCB mounting via straight or angled solder pins 1.2 x 1.2 mm solder pins allow nominal current up to 16 A, enhancing stability of shorter headers With coding fingers
- Available Quantity: 0
$10.35
Electrical data
IEC Approvals
Ratings per | IEC/EN 60664-1 |
Rated voltage (III / 3) | 250 |
Rated impulse voltage (III/3) | 4 |
Rated voltage (III/2) | 320 |
Rated impulse voltage (III/2) | 4 |
Nominal voltage (II/2) | 630 |
Rated surge voltage (II/2) | 4 |
Rated current | 16 |
Legend (ratings) | (III / 2) ≙ Overvoltage category III / Pollution degree 2 |
UL Approvals
Approvals per | UL 1059 |
Rated voltage UL (Use Group B) | 300 |
Rated current UL (Use Group B) | 15 |
Rated voltage UL (Use Group D) | 300 |
Rated current UL (Use Group D) | 10 |
Ratings per UL
Rated voltage (UL 1977) | 600 |
Rated current UL 1977 | 15 |
CSA Approvals
Approvals per | CSA |
Rated voltage CSA (Use Group B) | 300 |
Rated current CSA (Use Group B) | 15 |
Rated voltage CSA (Use Group D) | 300 |
Rated current CSA (Use Group D) | 10 |
Notes
Safety information 1 | The MCS – MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. |
Variants: | Other pole numbers 3.8 mm pin projection for male headers with straight solder pins Gold-plated or partially gold-plated contact surfaces Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/. |
Connection data
Total number of potentials | 24 |
Number of connection types | 1 |
Number of levels | 1 |
Physical data
Pin spacing | 5 mm / 0.197 inches |
Width | 123.2 mm / 4.85 inches |
Height | 17 mm / 0.669 inches |
Height from the surface | 12 mm / 0.472 inches |
Depth | 8.4 mm / 0.331 inches |
Solder pin length | 5 |
Solder pin dimensions | 1.2 x 1.2 mm |
Drilled hole diameter with tolerance | 1.7 (+0.1) mm |
Mechanical data
Variable coding | Yes |
Anti-rotation protection | Yes |
Plug-in connection
Contact type (pluggable connector) | Male connector/plug |
Connector (connection type) | for PCB |
Mismating protection | No |
Plugging without loss of pin spacing | No |
Mating direction to the PCB | 90 |
Locking of plug-in connection | none |
PCB contact
PCB Contact | THT |
Solder pin arrangement | over the entire male connector (in-line) |
Number of solder pins per potential | 1 |
Material data
Note (material data) | |
Color | gray |
Material group | I |
Insulation material | Polyamide (PA66) |
Flammability class per UL94 | V0 |
Contact material | Electrolytic copper (ECu) |
Contact plating | Tin |
Fire load | 0.132 |
Weight | 9 |
Environmental requirements
Limit temperature range | -60 … +100 °C |
Additional Information
Technical Section
CAD data
2D/3D Models 231-184/001-000
CAE data
EPLAN Data Portal 231-184/001-000
ZUKEN Portal 231-184/001-000
EPLAN Data Portal 231-184/001-000
PCB Design
Symbol and Footprint 231-184/001-000
Compliance Search
Environmental Product Compliance 231-184/001-000