832-3625 - THT male header; 1.2 x 1.2 mm solder pin; angled (0° to PCB); Pin spacing 10.16 mm; 5-pole
- Brand: Wago
- Product Code: 832-3625
Description: Male header may be mounted horizontally or vertically via straight or angled solder pins Three solder pins per pole provide high electrical and mechanical stability Mating face (IP2XB) with higher protection against accidental contact 100% protected against mismating Coding via coding fingers
Description: Male header may be mounted horizontally or vertically via straight or angled solder pins Three solder pins per pole provide high electrical and mechanical stability Mating face (IP2XB) with higher protection against accidental contact 100% protected against mismating Coding via coding fingers
- Available Quantity: 0
$12.01
Electrical data
IEC Approvals
Ratings per | IEC/EN 60664-1 |
Rated voltage (III / 3) | 800 |
Rated impulse voltage (III/3) | 8 |
Rated voltage (III/2) | 1000 |
Rated impulse voltage (III/2) | 8 |
Nominal voltage (II/2) | 1000 |
Rated surge voltage (II/2) | 8 |
Rated current | 76 |
Legend (ratings) | (III / 2) ≙ Overvoltage category III / Pollution degree 2 |
UL Approvals
Approvals per | UL 1059 |
Rated voltage UL (Use Group B) | 300 |
Rated current UL (Use Group B) | 66 |
Rated voltage UL (Use Group C) | 300 |
Rated current UL (Use Group C) | 66 |
Rated voltage UL (Use Group D) | 600 |
Rated current UL (Use Group D) | 5 |
Ratings per UL
Rated voltage (UL 1977) | 600 |
Rated current UL 1977 | 85 |
CSA Approvals
Approvals per | CSA |
Rated voltage CSA (Use Group B) | 300 |
Rated current CSA (Use Group B) | 66 |
Rated voltage CSA (Use Group C) | 300 |
Rated current CSA (Use Group C) | 66 |
Rated voltage CSA (Use Group D) | 600 |
Rated current CSA (Use Group D) | 5 |
Notes
Safety information 1 | The MCS – MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. |
Variants: | Other pole numbers Protection against PCB mounting errors Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/. |
Connection data
Total number of potentials | 5 |
Number of connection types | 1 |
Number of levels | 1 |
Physical data
Pin spacing | 10.16 mm / 0.4 inches |
Width | 52.1 mm / 2.051 inches |
Height | 20.5 mm / 0.807 inches |
Height from the surface | 16.5 mm / 0.65 inches |
Depth | 32 mm / 1.26 inches |
Solder pin length | 4 |
Solder pin dimensions | 1.2 x 1.2 mm |
Drilled hole diameter with tolerance | 1.7 (+0.1) mm |
Mechanical data
Variable coding | Yes |
Plug-in connection
Contact type (pluggable connector) | Male header |
Connector (connection type) | for PCB |
Mismating protection | Yes |
Mating direction to the PCB | 0 |
Locking of plug-in connection | none |
PCB contact
PCB Contact | THT |
Solder pin arrangement | over the entire male connector (in-line) |
Number of solder pins per potential | 3 |
Material data
Note (material data) | |
Color | light gray |
Material group | I |
Insulation material | Polybutylene terephthalate (PBT) |
Flammability class per UL94 | V0 |
Clamping spring material | Chrome-nickel spring steel (CrNi) |
Contact material | Electrolytic copper (ECu) |
Contact plating | Silver |
Weight | 26.8 |
Environmental requirements
Limit temperature range | -60 … +120 °C |
Additional Information
Technical Section
CAD data
2D/3D Models 832-3625
PCB Design
Symbol and Footprint 832-3625
CAE data
ZUKEN Portal 832-3625
Compliance Search
Environmental Product Compliance 832-3625