857-104 - Relay socket; Nominal input voltage: 24 V AC/DC; for 5 mm basic relays; Yellow status indicator
- Brand: Wago
- Product Code: 857-104
- Available Quantity: 0
$25.54
Technical data
Control circuit
Nominal input voltage UN | AC/DC 24 V |
Load circuit
Limiting continuous current | 6 A |
Switching voltage (max.) | AC 250 V |
Signaling
Status indicator | Yellow LED |
Safety and protection
Rated voltage | 300 |
Rated surge voltage | 4 |
Type of circuits | Mains circuits |
Overvoltage category | III |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 3.51 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Insulation type (control/load circuit) | Reinforced insulation (safe isolation) |
Insulation type (between adjacent devices of the same type) | Reinforced insulation (safe isolation) |
Protection type | IP20 |
Notes
Note | The relay/SSR used influences the electrical properties of the module. |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Fine-stranded conductor; with insulated ferrule | 0.34 … 1.5 mm² / 22 … 16 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 6 mm / 0.236 inches |
Height | 94 mm / 3.701 inches |
Depth from upper-edge of DIN-rail | 81 mm / 3.189 inches |
Mechanical data
Mounting type | DIN-35 rail |
Mounting position | Horizontal (standing/lying); vertical |
Material data
Weight | 26.3 |
Environmental requirements
Ambient temperature (operation at UN) | -40 … 70 °C |
Surrounding air temperature (storage) | -40 … +70 °C |
Processing temperature | -25 … +50 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 30 K) |
Relative humidity | 5 … 85 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61010-2-201 UR |