101055800 - BN 65-RZ

Product type description

BN 65-RZ

Article number (order number)

101055800

EAN (European Article Number)

4030661009490

eCl@ss number, version 9.0

27-27-01-05

eCl@ss number, version 11.0

27-27-01-05

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Certificates

cULus

Working principle

Magnetic drive

Housing construction form

Cylinder smooth

Enclosure material

Glass-fibre, reinforced thermoplastic

Gross weight

70 g

Latching

Yes

Suitable for elevators

Yes

bias magnet

Yes

Number of snap-in contacts

1

Actuating panels

lateral

Actuating element

Magnet

Mechanical life, minimum

1,000,000,000 Operations

Repeat accuracy R R

0.3 mm

Actuating speed, maximum

18 m/s

Mounting

central with threated flange

Tightening torque of nuts, maximum

3 Nm

Switching distance S

15 mm … 60 mm

BP 10N = 15 mm

BP 10S = 15 mm

2 x BP 10N = 20 mm

2 x BP 10S = 20 mm

BP 15N = 17 mm

BP 15S = 17 mm

2 x BP 15/2N = 22 mm

2 x BP 15/2S = 22 mm

BP 34N = 10 ... 30 mm

BP 34S = 15 ... 30 mm

BP 20N = 25 mm

BP 20S = 25 mm

BP 31N = 25 mm

BP 31S = 25 mm

BP 11N = 15 mm

BP 11S = 15 mm

2 x BP 11N = 25 mm

2 x BP 11S = 25 mm

BP 12N = 20 mm

BP 12S = 20 mm

2 x BP 12N = 10 ... 30 mm

2 x BP 12S = 10 ... 30 mm

BP 21N = 15 ... 45 mm

BP 21S = 15 ... 45 mm

2 x BP 21N = 20 ... 60 mm

2 x BP 21S = 20 ... 60 mm

BE 20N = 20 mm

BE 20S = 20 mm

Note (Switching distance Sn)

Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Type of connection

Cable

Length of cable

1 m

Wire cross-section

0.75 mm

Wire cross-section

18 AWG

Material of the Cable mantle

H03VV-F

Diameter of sensor

13 mm

width across flats

22 BK

Length of sensor

103 mm

Degree of protection

IP67

Ambient temperature, minimum

-25 °C

Ambient temperature, maximum

+75 °C

Resistance to vibration to EN 60068-2-6

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g, on sine wave oscillation

Resistant to vibration

30 g, on sine wave oscillation

Switching voltage, maximum

250 VAC

Switching current, maximum

3 A

Switching capacity, maximum

120 W

Switching element

bistable contact

Bounce duration, minimum

0.3 ms

Bounce duration, maximum

0.6 ms

Switching frequency, maximum

300 Hz

Switching frequency

1,080,000 /h

Design of switching elements

Reed contacts

Scope of delivery

Actuators must be ordered separately.

Recommendation (actuator)

BP 10 S

2x BP 10 S

BP 15 S

BP 34 S

BP 20 S

BP 31 S

BP 11 S

2x BP 11 S

BP 12 S

BP 21 S

2x BP 21 S

BE 20 S

BP 10 N

2x BP 10 N

BP 15 N

2 x BP 15/2 N

2x BP 15/2 S

BP 34 N

BP 20 N

BP 31 N

BP 11 N

2x BP 11 N

BP 12 N

2x BP 12 N

2x BP 12 S

BP 21 N

2x BP 21 N

BE 20 N

Recommendation (actuator, lift switchgear)

BP 10

2 x BP 15/2

2 x BP 15

2 x BP 10

BP 15

BP 34

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).

This does not apply to the bistable contact.