101057185 - BN 31-RZ 4,0M

Product type description

BN 31-RZ 4,0M

Article number (order number)

101057185

EAN (European Article Number)

4030661024684

eCl@ss number, version 9.0

27-27-01-05

eCl@ss number, version 11.0

27-27-01-05

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Working principle

Magnetic drive

Housing construction form

rectangular

Enclosure material

Glass-fibre, reinforced thermoplastic

Active area

Plastic

Gross weight

200 g

Latching

Yes

Suitable for elevators

Yes

Number of snap-in contacts

1

Actuating element

Magnet

Mechanical life, minimum

1,000,000,000 Operations

Repeat accuracy R R

0.3 mm

Actuating speed, maximum

18 m/s

Mounting

Enclosure with mounting slots

Note (Switching distance Sn)

Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Length of cable

4 m

Wire cross-section

0.75 mm

Wire cross-section

18 AWG

Material of the Cable mantle

H03VV-F

Length of sensor

13 mm

Width of sensor

88 mm

Height of sensor

25 mm

Degree of protection

IP67

Ambient temperature, minimum

-25 °C

Ambient temperature, maximum

+75 °C

Resistance to vibration to EN 60068-2-6

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Switching current, maximum

3 A

Switching capacity, maximum

80 W

Switching capacity, maximum

80 VA

Design of switching elements

Reed contacts

Scope of delivery

Actuators must be ordered separately.

Recommendation (actuator)

BP 10 S

2x BP 10 S

BP 15 S

BP 34 S

BP 20 S

BP 31 S

BP 11 S

2x BP 11 S

BP 12 S

BP 21 S

2x BP 21 S

BP 10 N

2x BP 10 N

BP 15 N

2 x BP 15/2 N

2x BP 15/2 S

BP 34 N

BP 20 N

BP 31 N

BP 11 N

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.

The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.