101097201 - IFL 2-250-01P
- Brand: Schmersal
- Product Code: 101097201
Description: Product type description:IFL (1)-(2)-(3)(4)(5)-(6)(1)2Switching distance 2 mm
4Switching distance 4 mm
(2)250Square design, 40 x 25 x 12 mm(3)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(4)withoutCableDDC 2-wire(5)Nn-typePp-type(6)1716cable entries from sides
Description: Product type description:IFL (1)-(2)-(3)(4)(5)-(6)(1)2Switching distance 2 mm
4Switching distance 4 mm
(2)250Square design, 40 x 25 x 12 mm(3)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(4)withoutCableDDC 2-wire(5)Nn-typePp-type(6)1716cable entries from sides
Productfeatures
- Thermoplastic enclosure
- DC 3-wire
- Double-insulated
- Design 250
Data
Ordering data
Product type description | IFL 2-250-01P |
Article number (order number) | 101097201 |
EAN (European Article Number) | 4030661086682 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Block |
Installation conditions (mechanical) | flush |
Enclosure material | Plastic |
Gross weight | 85 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 3 |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 2 mm |
Mechanical data - Connection technique
Type of connection | Cable |
Length of cable | 2 m |
Wire cross-section | 0.34 mm |
Material of the Cable mantle | PVC |
Mechanical data - Dimensions
Length of sensor | 12 mm |
Width of sensor | 40 mm |
Height of sensor | 25 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection class | II |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 10 V |
Operating voltage, maximum | 30 V |
No-load supply current, maximum I | 3 mA |
Operating current | 200 mA |
Switching element | Opener (NC) |
Protection circuit integrated | inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating |
Switching frequency, approx. | 1,000 Hz |
Electrical data - Digital Output
Voltage drop U | 1.2 V |
Current at Voltage drop U | 0.2 A |
Design of switching elements | p-type |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Note
Note (General) | Switches can be mounted adjacent to each other without interference. with 2 screws M3 x 6 for rear mounting maximum screwing depth: 6 mm |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch