101173958 - IFL 30-384-11P-M20
- Brand: Schmersal
- Product Code: 101173958
Description: Product type description:IFL (1)-(2)-(3)(4)(1)30Switching distance 30 mm
(2)384Square design, 120 x 55 x 40 mm(3)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(4)Nn-typePp-type
Description: Product type description:IFL (1)-(2)-(3)(4)(1)30Switching distance 30 mm
(2)384Square design, 120 x 55 x 40 mm(3)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(4)Nn-typePp-type
Productfeatures
- Thermoplastic enclosure
- DC 4-wire
- Double-insulated
- Wiring compartment
- 3 cable entries M 20 x 1.5
- Design 384
Data
Ordering data
Product type description | IFL 30-384-11P-M20 |
Article number (order number) | 101173958 |
EAN (European Article Number) | 4030661303109 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Block |
Installation conditions (mechanical) | not flush |
Enclosure material | Plastic |
Gross weight | 245 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 4 |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 30 mm |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, maximum | 2 x 1.5 mm² |
Mechanical data - Dimensions
Length of sensor | 40 mm |
Width of sensor | 55 mm |
Height of sensor | 120 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection class | II |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 10 V |
Operating voltage, maximum | 60 V |
No-load supply current, maximum I | 5.5 mA |
Operating current | 400 mA |
Switching element | NO contact and NC contact (antivalent) |
Protection circuit integrated | inductive interference protection Protection against polarity reversal |
Switching frequency, approx. | 25 Hz |
Electrical data - Digital Output
Voltage drop U | 1.5 V |
Current at Voltage drop U | 0.4 A |
Design of switching elements | p-type |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch