101186834 - BN 12-10Z/V

Product type description

BN 12-10Z/V

Article number (order number)

101186834

EAN (European Article Number)

4030661335346

eCl@ss number, version 9.0

27-27-01-05

eCl@ss number, version 11.0

27-27-01-05

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Working principle

Magnetic drive

Housing construction form

Cylinder, thread

Enclosure material

Metal film

Gross weight

60.3 g

Suitable for elevators

Yes

bias magnet

Yes

Number of shutters

1

Actuating panels

front side

Actuating element

Magnet

Mechanical life, minimum

10,000,000 Operations

Repeat accuracy R R

0.3 mm

Actuating speed, maximum

18 m/s

Mounting

central with threated flange M12 x 1

Switching distance S

5 mm … 55 mm

BP 10S = 5 mm

2 x BP 10S = 10 mm

BP 15S = 6 mm

BP 34S = 20 mm

BP 20S = 15 mm

BP 31S = 15 mm

BP 11S = 5 mm

2 x BP 11S = 15 mm

BP 12S = 10 mm

2 x BP 12S = 25 mm

BP 21S = 30 mm

2 x BP 21S = 20 ... 55 mm

BP 22S = 25 mm

2 x BP 22S = 15 ... 55 mm

BE 20 S = 6 mm

Note (Switching distance Sn)

Actuating distance up to 55 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Type of connection

Cable

Length of cable

1 m

Wire cross-section

0.25 mm

Wire cross-section

23 AWG

Material of the Cable mantle

LiYY

Diameter of sensor

10.7 mm

Length of sensor

71 mm

Degree of protection

IP67

Ambient temperature, minimum

-25 °C

Ambient temperature, maximum

+70 °C

Resistance to vibration to EN 60068-2-6

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Switching voltage, maximum

200 VAC

Switching current, maximum

1 A

Switching capacity, maximum

30 W

Switching capacity, maximum

30 VA

Switching element

Normally open contact (NO)

Bounce duration, maximum

0.2 ms

Switching frequency, maximum

300 Hz

Design of switching elements

Reed contacts

Scope of delivery

Actuators must be ordered separately.

Recommendation (actuator)

BP 10 S

2x BP 10 S

BP 15 S

BP 34 S

BP 20 S

BP 31 S

BP 11 S

2x BP 11 S

BP 12 S

2x BP 12S

BP 21 S

2x BP 21 S

BP 22 S

2x BP 22 S

BE 20 S

Recommendation (actuator, lift switchgear)

BP 10

2 x BP 10

BP 15

BP 34

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.

The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.