101187280 - BN 650-01Z

Product type description

BN 650-01Z

Article number (order number)

101187280

EAN (European Article Number)

4030661335629

eCl@ss number, version 9.0

27-27-01-05

eCl@ss number, version 11.0

27-27-01-05

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Working principle

Magnetic drive

Housing construction form

Cylinder smooth

Enclosure material

Glass-fibre, reinforced thermoplastic

Gross weight

65 g

Suitable for elevators

Yes

bias magnet

Yes

Number of openers

1

Actuating panels

lateral

Actuating element

Magnet

Mechanical life, minimum

100,000,000 Operations

Repeat accuracy R R

0.3 mm

Actuating speed, maximum

18 m/s

Mounting

central with threated flange

Switching distance S

5 mm … 50 mm

BP 10 = 5 mm

2 x BP 10 = 17 mm

BP 15 = 6 mm

2 x BP 15 = 17 mm

2 x BP 15/2 = 17 mm

BP 34 = 15 ... 20 mm

BP 20 = 20 mm

BP 31 = 20 mm

BP 11 = 20 mm

BP 12 = 10 ... 30 mm

BP 21 = 25 ... 50 mm

Note (Switching distance Sn)

Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Type of connection

Cable

Length of cable

1 m

Wire cross-section

0.25 mm

Wire cross-section

23 AWG

Material of the Cable mantle

LiYY

Diameter of sensor

13 mm

Length of sensor

103 mm

Degree of protection

IP67

Ambient temperature, minimum

-25 °C

Ambient temperature, maximum

+70 °C

Resistance to vibration to EN 60068-2-6

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Switching voltage, maximum

200 VAC

Switching voltage, maximum

200 VDC

Switching current, maximum

1 A

Switching capacity, maximum

30 W

Switching capacity, maximum

30 VA

Switching element

Opener (NC)

Bounce duration, maximum

0.2 ms

Switching frequency, maximum

300 Hz

Switching frequency

1,080,000 /h

Design of switching elements

Reed contacts

Scope of delivery

Actuators must be ordered separately.

Recommendation (actuator)

BP 10

2x BP 10

BP 15

2x BP 15

2x BP 15/2

BP 34

BP 20

BP 31

BP 11

BP 12

BP 21

Recommendation (actuator, lift switchgear)

BP 10

2 x BP 15/2

2 x BP 15

2 x BP 10

BP 15

BP 34

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).

This does not apply to the bistable contact.