Productfeatures
- Non-contact principle
- Long life
- 104 mm x 52 mm x 47 mm
- Aluminium enlosure
- Actuating distance up to 50 mm depending on actuating magnet and version
- Screw connection
- Highly resistant to vibration
- Available for actuation from front or side
Data
Ordering data
Product type description | BN 20-2RZ-ST-2628 |
Article number (order number) | 101195530 |
EAN (European Article Number) | 4030661361437 |
eCl@ss number, version 9.0 | 27-27-01-05 |
eCl@ss number, version 11.0 | 27-27-01-05 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
General data
Standards | EN 60947-5-1 |
Working principle | Magnetic drive |
Housing construction form | rectangular |
Enclosure material | Aluminium |
Active area | Metal film |
Gross weight | 292 g |
General data - Features
bias magnet | Yes |
Number of snap-in contacts | 2 |
Mechanical data
Actuating element | Magnet |
Mechanical life, minimum | 1,000,000,000 Operations |
Repeat accuracy R R | 0.3 mm |
Actuating speed, maximum | 18 m/s |
Mechanical data - Switching distances according EN IEC 60947-5-3
Note (Switching distance Sn) | Actuating distance up to 50 mm depending on version and actuating magnet |
Mechanical data - Dimensions
Length of sensor | 47 mm |
Width of sensor | 104 mm |
Height of sensor | 52 mm |
Ambient conditions
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +90 °C |
Resistant to vibration | 50 g, on sine wave oscillation |
Electrical data
Switching current, maximum | 3 A |
Switching capacity, maximum | 120 W |
Switching capacity, maximum | 120 VA |
Switching frequency | 1,080,000 /h |
Electrical data - Digital Output
Design of switching elements | Reed contacts |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BP 10 S 2x BP 10 S BP 15 S BP 34 S BP 20 S BP 31 S BP 11 S 2x BP 11 S BP 12 S BP 21 S 2x BP 21 S BE 20 S BP 10 N 2x BP 10 N BP 15 N 2 x BP 15/2 N 2x BP 15/2 S BP 34 N BP 20 N BP 31 N BP 11 N 2x BP 11 N BP 12 N 2x BP 12 N 2x BP 12 S BP 21 N |
Note
Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). |
Operating instructions (supplementary sheet/quick guide)
BN 20
EC Declaration of conformity
Magnetic reed switch
Info
Magnetic reed switch - Actuating distances