101126738 - IFL 10-200L-11P
- Brand: Schmersal
- Product Code: 101126738
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(1)10Switching distance 10 mm
(2)200Cylinder, smooth, Ø 20 mm, plastic(3)withoutStandard bodyLLong design(4)01Opener (NC)10Normally open contact (NO)111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connector(6)withoutAC, alternating currentPp-type
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(1)10Switching distance 10 mm
(2)200Cylinder, smooth, Ø 20 mm, plastic(3)withoutStandard bodyLLong design(4)01Opener (NC)10Normally open contact (NO)111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connector(6)withoutAC, alternating currentPp-type
Productfeatures
- Thermoplastic enclosure
- DC 4-wire
- Long design
- Double-insulated
- Design Ø 20 mm
Data
Ordering data
Product type description | IFL 10-200L-11P |
Article number (order number) | 101126738 |
EAN (European Article Number) | 4030661050652 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Cylinder smooth |
Installation conditions (mechanical) | not flush |
Enclosure material | Plastic |
Active area | Plastic |
Material of the terminal fixing | Plastic |
Gross weight | 126 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 4 |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 10 mm |
Mechanical data - Connection technique
Type of connection | Cable |
Length of cable | 2 m |
Wire cross-section | 0.25 mm |
Material of the Cable mantle | Plastic |
Mechanical data - Dimensions
Diameter of sensor | 20 mm |
Length of sensor | 79 mm |
Width of sensor | 20 mm |
Height of sensor | 20 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection class | II |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 10 V |
Operating voltage, maximum | 60 V |
No-load supply current, maximum I | 5.5 mA |
Operating current | 400 mA |
Switching element | NO contact and NC contact (antivalent) |
Protection circuit integrated | inductive interference protection Protection against polarity reversal |
Switching frequency, approx. | 3,500 Hz |
Electrical data - Digital Output
Voltage drop U | 1.5 V |
Current at Voltage drop U | 0.4 A |
Design of switching elements | p-type |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Scope of delivery
Note (scope of delivery, number and type) | Clamp H 20 is included in delivery |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch