101106015 - IFL 4B-12-10STPK1
- Brand: Schmersal
- Product Code: 101106015
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(7)(8)-(9)(1)2Switching distance 2 mm
4Switching distance 4 mm
NB, MBN, BNQuasi-embeddable(2)12Cylinder, thread M12, metal120Cylinder, thread M12, plastic(3)withoutStandard bodyMMiniature bodyLLong design(4)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connectorTConductor with strain relief(6)withoutStandard connector version2Alternative conector version(7)Nn-typePp-type(8)KMax. fuse rating1pulsed(9)2033Stainless steel enclosure
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(7)(8)-(9)(1)2Switching distance 2 mm
4Switching distance 4 mm
NB, MBN, BNQuasi-embeddable(2)12Cylinder, thread M12, metal120Cylinder, thread M12, plastic(3)withoutStandard bodyMMiniature bodyLLong design(4)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connectorTConductor with strain relief(6)withoutStandard connector version2Alternative conector version(7)Nn-typePp-type(8)KMax. fuse rating1pulsed(9)2033Stainless steel enclosure
Productfeatures
- Metal enclosure
- DC 3-wire
- Connector M12
- higher switching distance
- Design M12
Data
Ordering data
Product type description | IFL 4B-12-10STPK1 |
Article number (order number) | 101106015 |
EAN (European Article Number) | 4030661048482 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Cylinder, thread |
Installation conditions (mechanical) | Quasi-embeddable |
Note (Installation condition) | Steel: x ≥ 2.4 mm Other metal: x ≥ 1.2 mm |
Enclosure material | Brass |
Enclosure coating material | nickel-plated |
Active area | Plastic |
Material of the nuts | Nickel plated brass |
Gross weight | 25 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 3 |
Mechanical data
Tightening torque of nuts, maximum | 15 Nm |
Note (Tightening torque of nuts) | In the shell core area: max. 500 Ncm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 4 mm |
Mechanical data - Connection technique
Type of connection | Connector M12 |
Mechanical data - Dimensions
ISO thread of the sensor | M12 |
width across flats | 17 BK |
Length of sensor | 61 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection class | 0 |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 5 V |
Operating voltage, maximum | 40 V |
No-load supply current, maximum I | 0.5 mA |
Operating current | 200 mA |
Switching element | Normally open contact (NO) |
Protection circuit integrated | inductive interference protection Protection against polarity reversal Surge protection short-circuit protection (pulsed) |
Switching frequency, approx. | 600 Hz |
Electrical data - Digital Output
Voltage drop U | 1.3 V |
Current at Voltage drop U | 0.2 A |
Design of switching elements | p-type |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Note
Note (General) | Instead of nuts, a mounting clamp can be provided. |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch