101139949 - IFL 5-18L-10/01P
- Brand: Schmersal
- Product Code: 101139949
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(7)-(8)(1)215Switching distance 5 mm
8Switching distance 8 mm
10Switching distance 10 mm
(2)18Cylinder, thread M18, metal180Cylinder, thread M18, plastic(3)withoutStandard bodyMMiniature bodyLLong design(4)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connectorTConductor with strain reliefAAlternating current/direct current AC/DCDDC 2-wire(6)withoutStandard connector version2Alternative conector version(7)Nn-typePp-type(8)2033Stainless steel enclosure2130Can be used up to +130C, without LED switching conditions display
Description: Product type description:IFL (1)-(2)(3)-(4)(5)(6)(7)-(8)(1)215Switching distance 5 mm
8Switching distance 8 mm
10Switching distance 10 mm
(2)18Cylinder, thread M18, metal180Cylinder, thread M18, plastic(3)withoutStandard bodyMMiniature bodyLLong design(4)01Opener (NC)10Normally open contact (NO)10/01NO contact / NC contact with wiring compartment111 NO contact / 1 NC contact antivalent(5)withoutCableSTMale connectorTConductor with strain reliefAAlternating current/direct current AC/DCDDC 2-wire(6)withoutStandard connector version2Alternative conector version(7)Nn-typePp-type(8)2033Stainless steel enclosure2130Can be used up to +130C, without LED switching conditions display
Productfeatures
- 1 Cable entry PG9 x 1.5
- Metal enclosure
- DC 3-wire
- Wiring compartment
- Long design
- Design M 18 x 1
Data
Ordering data
Product type description | IFL 5-18L-10/01P |
Article number (order number) | 101139949 |
EAN (European Article Number) | 4030661117195 |
eCl@ss number, version 9.0 | 27-27-01-01 |
eCl@ss number, version 11.0 | 27-27-01-01 |
ETIM number, version 7.0 | EC002714 |
ETIM number, version 6.0 | EC002714 |
Approvals - Standards
Certificates | CCC |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Cylinder, thread |
Installation conditions (mechanical) | flush |
Enclosure material | Brass |
Enclosure coating material | nickel-plated |
Active area | Plastic |
Material of the nuts | Brass |
Gross weight | 75 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 3 |
Mechanical data
Tightening torque of nuts, maximum | 18 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 5 mm |
Mechanical data - Connection technique
Type of connection | Screw connection |
Cable section, maximum | 1 x 1.5 mm² |
Mechanical data - Dimensions
ISO thread of the sensor | M18 |
width across flats | 24 BK |
Length of sensor | 126 mm |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection class | 0 |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 10 V |
Operating voltage, maximum | 60 V |
No-load supply current, maximum I | 5.5 mA |
Operating current | 400 mA |
Switching element | NO contact or NC contact |
Protection circuit integrated | inductive interference protection Protection against polarity reversal |
Switching frequency, approx. | 500 Hz |
Electrical data - Digital Output
Voltage drop U | 1.5 V |
Current at Voltage drop U | 0.4 A |
Design of switching elements | p-type |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Note
Note (General) | Instead of nuts, a mounting clamp can be provided. Programmable by repositioning the plug-in jumper at the terminal screws |
Operating instructions (supplementary sheet/quick guide)
IFL Inductive proximity switch
EC Declaration of conformity
IFL Inductive proximity switch