2857-535 - Temperature signal conditioner; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC
- Brand: Wago
- Product Code: 2857-535
Description: Short description: WAGOs RTD TC temperature signal conditioner for RTD sensors, potentiometers, resistors and thermocouples monitors and reports signals for up to two switching thresholds. The sensor and status information that is collected is also converted to a standard analog signal. Features: A relay with changeover contact reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values). Configurable Pt factor Adjustable software filter Simulation of input/output response via interface configuration display Input of customer-specific sensors via the interface configuration software Safe 3-way isolation with 3 kV test voltage per EN 61010-1 Analog unipolar/bipolar signals (current/voltage) at output Additional digital signal output for configured measurement range limits Adjustable transfer characteristic
Description: Short description: WAGOs RTD TC temperature signal conditioner for RTD sensors, potentiometers, resistors and thermocouples monitors and reports signals for up to two switching thresholds. The sensor and status information that is collected is also converted to a standard analog signal. Features: A relay with changeover contact reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values). Configurable Pt factor Adjustable software filter Simulation of input/output response via interface configuration display Input of customer-specific sensors via the interface configuration software Safe 3-way isolation with 3 kV test voltage per EN 61010-1 Analog unipolar/bipolar signals (current/voltage) at output Additional digital signal output for configured measurement range limits Adjustable transfer characteristic
- Available Quantity: 0
$654.50
Technical data
Configuration
Configuration options | WAGO Interface Configuration Software WAGO Interface Configuration App WAGO Configuration Display |
Input
Input signal type | RTD sensors Potentiometer Resistance TC sensors |
Input – RTD sensors
Sensor types (RTD) | Pt10 … Pt2000 (expandable) |
Sensor connection | 2-wire; 3-wire; 4-wire; differential; potentiometer |
Sensor power supply (RTD) max. | ≤ 0.5 mA |
Temperature measurement range (RTD) | -200 … 850°C |
Measurement span (RTD) min. | 50 |
Input – TC sensors
Sensor types (TC) | Type J Type K Type E Type R Type N Type S Type T Type B Type C |
Temperature measurement range (TC) | -210 … 1200 °C (Type J); -200 … 1372 °C (Type K); -200 … 1000 °C (Type E); 250 … 1768 °C (Type R); -200 … 1300 °C (Type N); -50 … 1664 °C (Type S); -200 … 400 °C (Type T); 250 … 1820 °C (Type B); 0 … 2320 °C (Type C) |
Measurement span (TC) min. | 100 |
Cold junction compensation | ON/OFF (default: ON) |
Cold junction error | 3 K (typ. 2 K ) |
Input – resistors
Input range (resistor) | 0 … 10 kΩ |
Input range (potentiometer) | 0 … 10 kΩ |
Measurement span (min.) | 50 |
Output – analog
Output signal type | Current Voltage |
Output signal (V) | ± 12 V |
Output signal (A) | ±24 mA |
Load impedance (voltage output) | ≥ 2 kΩ |
Load impedance (current output) | ≤ 600 Ω |
Output – digital
Switching voltage (DO) max. | Supply voltage (applied): −0.3 V |
Continuous current (DO) max. | 100 mA (no internal restriction) |
Number of switching thresholds (DO) | 1 or 2 (adjustable) |
Configurable rise/fall delay time (DO) | 0 … 60 s (via software) |
Output – relay
Dielectric strength (open contact) (AC, 1 min) | 1 |
Number of changeover contacts | 1 |
Switching voltage (max.) | AC 250 V |
Limiting continuous current (relay; module assembly) | 6 A (≤ 60 °C); 3 A (60 … 70 °C) |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Number of switching thresholds (relay) | 1 or 2 (adjustable) |
Configurable rise/fall delay time (relay) | 0 … 60 s (via software) |
Signal processing
Software filter (adjustable) | Moving average value (filter level: 30) |
Step response (typ.) | 130 ms (2-wire); 700 ms (3-wire); 700 ms (4-wire); 600 ms (Differential); 500 ms (Potentiometer); 150 ms (Cold junction compensation (OFF)); 400 ms (Cold junction compensation (ON)) |
Measurement error
Transmission error (typ.) | ≤ 0.1 % at full measurement span |
Transmission error for the set measurement range | ≤ (100 K/set measurement range [K]) % |
Temperature coefficient | ≤ 0.01 %/K |
Supply
Power supply type | 24 VDC |
Nominal supply voltage US | DC 24 V |
Supply voltage range | -60 … +30 % |
Current consumption at nominal supply voltage | ≤ 70 mA (+ IDO) |
Notes
Note | This product is supplied with 24 VDC, which can be commoned using lateral push-in type jumper bars: (6.1) US+ (BR) and (6.2) GND 2 (BR). With this variant, it is necessary to ensure that the maximum permissible total current of 1 A is not exceeded. |
Safety and protection
Rated voltage of the measurement circuit connections per EN 61010-2-030 | AC 300 V |
Measurement category per EN/UL 61010-2-030 | CAT II (input) |
Note on insulation parameters | The digital output (DO) is at the potential of the supply. The service interface is located on the analog output potential. The DIN-rail contact (functional ground) is capacitively coupled to the analog output. |
Protection type | IP20 |
Connection data
Connection technology | Push-in CAGE CLAMP® |
WAGO connector | picoMAX® 5.0 |
Solid conductor | 0.2 … 2.5 mm² / 24 … 12 AWG |
Fine-stranded conductor | 0.2 … 2.5 mm² / 24 … 12 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 22.5 mm / 0.886 inches |
Height | 110 mm / 4.331 inches |
Depth from upper-edge of DIN-rail | 107 mm / 4.213 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Fire load | 1.796 |
Weight | 126.9 |
Environmental requirements
Pollution degree | 2 |
Ambient temperature (operation) | -40 … +70 °C |
Surrounding air temperature (storage) | -40 … +85 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 10 K) |
Temperature range of connection cable per UL 61010-2-201 (min.) | 90 |
Relative humidity | 5 … 95 % (non-condensing) |
Operating altitude (max.) | 2000 |
Standards and specifications
Conformity marking | CE |
EMC immunity to interference | EN 61000-6-2; EN 61326-2-3 |
EMC emission of interference | EN 61000-6-3; EN 61326-2-3 |
Standards/specifications | EN 61010-1 EN 61373 |
Bid Text
2857-535
2857-535
Instruction Leaflet
Signal Conditioner; RTD TC Temperature Signal Conditioner; Analog
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Software for Interface-Products
WAGO Interface Configuration Software G2 FULL
WAGO Interface Configuration Software G2 SMALL
CAD data
2D/3D Models 2857-535
CAE data
ZUKEN Portal 2857-535
EPLAN Data Portal 2857-535
Compliance Search
Environmental Product Compliance 2857-535