857-800 - JUMPFLEX® signal conditioner; temperature; configurable; Pt100, Pt200, Pt500 and Pt1000; resistance values 0 ... 1 kOhm , 0 ... 5 kOhm
- Brand: Wago
- Product Code: 857-800
Description: Short description: WAGOs temperature signal conditioner records Pt100, Pt200, Pt500, and Pt1000 sensors, as well as resistors up to 4.5 kOhm, converting the temperature signal into a standard analog signal at the output. Features: For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm 2-, 3- and 4-wire connection technology Calibrated measurement range switching Detects a sensor wire break/short circuit Detects measurement range underflow/overflow Clipping capability for analog signal limitation to output end values Safe 3-way isolation with 2.5 kV test voltage per EN 61140
Description: Short description: WAGOs temperature signal conditioner records Pt100, Pt200, Pt500, and Pt1000 sensors, as well as resistors up to 4.5 kOhm, converting the temperature signal into a standard analog signal at the output. Features: For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm 2-, 3- and 4-wire connection technology Calibrated measurement range switching Detects a sensor wire break/short circuit Detects measurement range underflow/overflow Clipping capability for analog signal limitation to output end values Safe 3-way isolation with 2.5 kV test voltage per EN 61140
- Available Quantity: 0
$298.60
Technical data
Configuration
Configuration options | DIP switch DIP switch |
Input
Input signal type | Resistance Pt sensors Resistor |
Input – RTD sensors
Sensor types (RTD) | Pt100 Pt200 Pt500 Pt1000 |
Sensor connection | 2-wire; 3-wire; 4-wire (switchable) |
Sensor power supply (RTD) max. | ≤ 0.5 mA |
Temperature measurement range (RTD) | -200 … 850°C |
Input – resistors
Input range (resistor) | 0 … 1 kΩ; 0 … 4.5 kΩ |
Output – analog
Output signal type | Current Voltage |
Output signal (V) | 0 … 5 V 1 … 5 V 0 … 10 V 2 … 10 V |
Output signal (A) | 0 … 10 mA 2 … 10 mA 0 … 20 mA 4 … 20 mA |
Load impedance (voltage output) | ≥ 2 kΩ |
Load impedance (current output) | ≤ 600 Ω |
Signal processing
Step response (typ.) | 180 ms (2-wire); 360 ms (3-wire) |
Measurement error
Transmission error (typ.) | ≤ 0.1 % at full measurement span |
Transmission error for the set measurement range | ≤ ((10 K/set measurement range [K]) + 0.1) % |
Temperature coefficient | ≤ 0.02 %/K |
Supply
Power supply type | 24 VDC |
Nominal supply voltage US | DC 24 V |
Supply voltage range | ±30 % |
Current consumption at nominal supply voltage | ≤ 40 mA |
Safety and protection
Protection type | IP20 |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 6 mm / 0.236 inches |
Height | 94 mm / 3.701 inches |
Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Color | light gray |
Weight | 35.3 |
Environmental requirements
Ambient temperature (operation) | -25 … +70 °C |
Surrounding air temperature (storage) | -40 … +85 °C |
Relative humidity | 5 … 95 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Conformity marking | CE |
EMC immunity to interference | EN 61000-6-2 |
EMC emission of interference | EN 61000-6-4 |
Standards/specifications | DNV |
Bid Text
857-800
857-800
Instruction Leaflet
Messumformer und Trennverstärker
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
WSCAD Universe 857-800
ZUKEN Portal 857-800
EPLAN Data Portal 857-800
CAD data
2D/3D Models 857-800
Compliance Search
Environmental Product Compliance 857-800