857-815 - JUMPFLEX® signal conditioner; temperature; loop-powered RTD; configurable
- Brand: Wago
- Product Code: 857-815
Description: Short description: WAGOs loop-powered RTD temperature signal conditioner records sensors (Pt100, Pt200, Pt500, Pt1000) and resistors up to 4.5 kΩ, converting the temperature signal into a standard analog signal at the output. The loop-powered RTD temperature signal conditioner provides safe isolation between input and output with 3 kV test voltage per EN 61010-1. Features: No additional supply voltage required For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm 2-, 3- and 4-wire connection technology Calibrated measurement range switching Detects a sensor wire break/short circuit Safe 2-way isolation with 3 kV test voltage per EN 61010-1
Description: Short description: WAGOs loop-powered RTD temperature signal conditioner records sensors (Pt100, Pt200, Pt500, Pt1000) and resistors up to 4.5 kΩ, converting the temperature signal into a standard analog signal at the output. The loop-powered RTD temperature signal conditioner provides safe isolation between input and output with 3 kV test voltage per EN 61010-1. Features: No additional supply voltage required For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm 2-, 3- and 4-wire connection technology Calibrated measurement range switching Detects a sensor wire break/short circuit Safe 2-way isolation with 3 kV test voltage per EN 61010-1
- Available Quantity: 0
$441.60
Technical data
Configuration
Configuration options | DIP switch DIP switch |
Input
Input signal type | Resistance Pt sensors Resistor |
Input current (max.) | 50 mA |
Input voltage (max.) | 30 V |
Input – RTD sensors
Sensor types (RTD) | Pt100 Pt200 Pt500 Pt1000 |
Sensor connection | 2-wire; 3-wire; 4-wire (switchable) |
Sensor power supply (RTD) max. | ≤ 0.5 mA |
Temperature measurement range (RTD) | -200 … 850°C |
Measurement span (RTD) min. | 50 |
Input – resistors
Input range (resistor) | 0 … 1 kΩ; 0 … 4.5 kΩ |
Output – analog
Output signal type | Current |
Output signal (A) | 4 … 20 mA 20 … 4 mA |
Load impedance (current output) | See derating graphic |
Signal processing
Step response (typ.) | 1000 ms |
Measurement error
Transmission error (typ.) | ≤ 0.1 % at full measurement span |
Transmission error for the set measurement range | ≤ ((40 K/set measurement range [K]) + 0.1) % |
Temperature coefficient | ≤ 0.02 %/K |
Supply
Power supply type | loop-powered (via output) |
Supply voltage | DC 8 … 30 V (Power is derived from the output circuit.) |
Safety and protection
Measurement category per EN/UL 61010-2-030 | CAT II (input) |
Protection type | IP20 |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Physical data
Width | 6 mm / 0.236 inch |
Height | 94 mm / 3.701 inch |
Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Weight | 38.9 |
Environmental requirements
Ambient temperature (operation) | -25 … +70 °C (at nominal current) |
Surrounding air temperature (storage) | -40 … +85 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 10 K) |
Temperature range of connection cable per UL 61010-2-201 (min.) | 90 |
Relative humidity | 5 … 95 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Conformity marking | CE |
EMC immunity to interference | EN 61000-6-2; EN 61326-1; EN 50121-3-2 |
EMC emission of interference | EN 61000-6-3; EN 61326-1; EN 50121-3-2 |
Standards/specifications | EN 50121-3-2 EN 61010-1 EN 61373 |
Bid Text
857-815
857-815
Instruction Leaflet
Temperature signal conditioner for RTD sensors; Current output signal; Power via output
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 857-815
CAE data
EPLAN Data Portal 857-815
WSCAD Universe 857-815
ZUKEN Portal 857-815
Compliance Search
Environmental Product Compliance 857-815