2857-401 - JUMPFLEX® signal conditioner; universal isolation amplifier; ; with picoMAX® connector; configurable
- Brand: Wago
- Product Code: 2857-401
Description: Short description: WAGOs signal conditioner converts, amplifies, filters, and electrically isolates analog signals. Features: Analog unipolar/bipolar signals at both input and output Digital signal output reacts to configured measurement range limits (configurable on/off switching delay and threshold value switch function with up to two threshold values). Digital HOLD input freezes the output signal. Clipping capability for analog signal limitation to output end values Adjustable software/hardware filter Input/output response simulation via configuration display Safe 3-way isolation with 4 kV test voltage per EN 61140
Description: Short description: WAGOs signal conditioner converts, amplifies, filters, and electrically isolates analog signals. Features: Analog unipolar/bipolar signals at both input and output Digital signal output reacts to configured measurement range limits (configurable on/off switching delay and threshold value switch function with up to two threshold values). Digital HOLD input freezes the output signal. Clipping capability for analog signal limitation to output end values Adjustable software/hardware filter Input/output response simulation via configuration display Safe 3-way isolation with 4 kV test voltage per EN 61140
- Available Quantity: 0
$786.80
Technical data
Configuration
Configuration options | DIP switch WAGO Interface Configuration Software WAGO Interface Configuration App WAGO Configuration Display DIP switch WAGO Interface Configuration Software WAGO Interface Configuration App WAGO Configuration Display |
Input
Input signal type | Voltage Current |
Input signal (V) | ±1 V 0 … 1 V ±5 V 0 … 5 V 1 … 5 V ±10 V 0 … 10 V 2 … 10 V ±30 V 0 … 30 V ±100 V 0 … 100 V ±200 V 0 … 220 V |
Input signal (A) | ±1 mA 0 … 1 mA ±10 mA 0 … 10 mA 2 … 10 mA ±20 mA 0 … 20 mA 4 … 20 mA ±100 mA 0 … 100 mA |
Input resistance (current input) | ≤ 50 Ω |
Input resistance (voltage input) | ≥ 1 MΩ |
Input current (max.) | ± 120 mA |
Input voltage (max.) | ±250 V |
Input – digital
Hold signal | 11.8 V … US |
Output – analog
Output signal type | Voltage Current |
Output signal (V) | ± 5 V 0 … 5 V 1 … 5 V ± 10 V 0 … 10 V 2 … 10 V |
Output signal (A) | ±10 mA 0 … 10 mA 2 … 10 mA ±20 mA 0 … 20 mA |
Load impedance (voltage output) | ≥ 1 kΩ |
Load impedance (current output) | ≤ 600 Ω |
Output – digital
Switching voltage (DO) max. | Supply voltage (applied): −0.3 V |
Continuous current (DO) max. | 100 mA (no internal restriction) |
Number of switching thresholds (DO) | 1 or 2 (adjustable) |
Configurable rise/fall delay time (DO) | 0 … 60 s (via software) |
Setting range (frequency generator) | 0.3 … 100 Hz |
Signal processing
Limit frequency | 10 kHz / 5 kHz / 100 Hz / 30 Hz (configurable via DIP switch or software) |
Software filter (adjustable) | Moving average value (filter level: 30) |
Step response (typ.) | 1 ms |
Measurement error
Transmission error (typ.) | ≤ 0.1 % of upper-range value |
Temperature coefficient | ≤ 0.01 %/K |
Supply
Power supply type | 24 VDC |
Nominal supply voltage US | DC 24 V |
Supply voltage range | ±30 % |
Current consumption at nominal supply voltage | ≤ 70 mA (+ IDO) |
Notes
Note |
|
Safety and protection
Protection type | IP20 |
Connection data
Connection technology | Push-in CAGE CLAMP® |
WAGO connector | picoMAX® 5.0 |
Solid conductor | 0.2 … 2.5 mm² / 24 … 12 AWG |
Fine-stranded conductor | 0.2 … 2.5 mm² / 24 … 12 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Physical data
Width | 12.5 mm / 0.492 inch |
Height | 110 mm / 4.331 inch |
Depth from upper-edge of DIN-rail | 107 mm / 4.213 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Fire load | 1.391 |
Weight | 85.9 |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C |
Surrounding air temperature (storage) | -40 … +85 °C |
Standards and specifications
Conformity marking | CE |
EMC immunity to interference | EN 61000-6-2; EN 61326-2-3; EN 50121-3-2 |
EMC emission of interference | EN 61000-6-4; EN 61326-2-3; EN 50121-3-2 |
Standards/specifications | EN 50121-3-2 EN 60664-1 EN 61373 |
Bid Text
2857-401
2857-401
2857-401
Instruction Leaflet
Messumformer, Universal-Trennverstärker
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Software for Interface-Products
WAGO Interface Configuration Software G2 SMALL
WAGO Interface Configuration Software G2 FULL
Firmware
2857-0401, Trennverstärker
CAD data
2D/3D Models 2857-401
CAE data
EPLAN Data Portal 2857-401
WSCAD Universe 2857-401
ZUKEN Portal 2857-401
Compliance Search
Environmental Product Compliance 2857-401