852-1106 - Industrial unmanaged switch; 16 - 10/100/1000 Mb/s RJ45 ports; extended temperature range
- Brand: Wago
- Product Code: 852-1106
Description: The 852-1106 Switch is an industrial unmanaged ETHERNET switch with 16 Gigabit ETHERNET ports for easily setting up small- to medium-sized networks. Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning. Status LEDs, a redundant power supply and an alarm contact (configurable via DIP switch) increase the switchs redundancy and diagnostic capabilities, providing higher operational uptime. Features: Redundant DC power supply Wide supply voltage range: 12 … 60 VDC DIP switches to set alarm functions Full compliance with IEEE 802.3, 802.3u and 802.3ab standards Non-blocking, store-and-forward switching Auto-negotiation at all 10/100/1000BASE-T ports Auto-MDI/MDIX (crossover) at all 10/100/1000BASE-T ports Integrated address look-up table, supports up to 8000 absolute MAC addresses Overvoltage protection Prioritization of PROFINET ETHERNET data packets (EtherType=0x8892) per IEEE802.1p
Description: The 852-1106 Switch is an industrial unmanaged ETHERNET switch with 16 Gigabit ETHERNET ports for easily setting up small- to medium-sized networks. Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning. Status LEDs, a redundant power supply and an alarm contact (configurable via DIP switch) increase the switchs redundancy and diagnostic capabilities, providing higher operational uptime. Features: Redundant DC power supply Wide supply voltage range: 12 … 60 VDC DIP switches to set alarm functions Full compliance with IEEE 802.3, 802.3u and 802.3ab standards Non-blocking, store-and-forward switching Auto-negotiation at all 10/100/1000BASE-T ports Auto-MDI/MDIX (crossover) at all 10/100/1000BASE-T ports Integrated address look-up table, supports up to 8000 absolute MAC addresses Overvoltage protection Prioritization of PROFINET ETHERNET data packets (EtherType=0x8892) per IEEE802.1p
- Available Quantity: 0
$685.50
Technical data
Switching mode | Store‐and‐forward; non-blocking |
Number of 1000BASE-T ports | 16 |
Communication standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/FX IEEE 802.3ab 1000BASE-T IEEE 802.3x Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Prioritization |
Redundancy function | Redundant DC power supply |
Configuration options | DIP switch for signal contact |
Diagnostics | Signal contact |
MAC table (size) | 8000 addresses |
Jumbo frame size | 10000. |
Supply voltage | 12 … 60 VDC |
Power consumption without PoE | 12 |
Baud rate | Copper cable: 10/1000 Mbit/s |
Transmission medium (communication/fieldbus) | Copper cable: Cat. 5e or higher, 100 m maximum cable length |
Controls | 2 x DIP switch: Alarm function power supplies |
Indicators | Device: LED (PWR, RPS) green: Power supply (primary), redundant power supply (secondary); LED (ALM) red: Alarm; per port: LED (1000, LNK/ACT) green: Status 1000 Mbps, LNK/ACT ports 1 … 16 |
Connection data
Connection technology: communication/fieldbus | Copper cable: 16 x RJ-45 |
Connection technology: supply | 1 x Built-in male connector: 231-436/001-000; included female connector (MCS Connectors): 2231-106/026-000 |
Physical data
Width | 50 mm / 1.969 inches |
Height | 162 mm / 6.378 inches |
Depth | 120 mm / 4.724 inches |
Mechanical data
Weight | 840 |
Color | black metallic |
Housing material | Aluminum |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C |
Surrounding air temperature (storage) | -40 … +80 °C |
Protection type | IP30 |
Relative humidity (without condensation) | 95 |
Mounting type | DIN-35 rail |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Fire load | 0.234 |
Manual
16-Port 1000BASE-T Industrial Switch
Bid Text
852-1106
852-1106
System Description
Industrial Switches ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 852-1106
CAE data
EPLAN Data Portal 852-1106
ZUKEN Portal 852-1106
Compliance Search
Environmental Product Compliance 852-1106