LM80063 - Leeson 10 HP Fire Pump Motor, 3 phase, 3600 RPM, 230/460 V, 215T Frame, TEFC - LM80063
- Brand: Regal
- Product Code: LM80063
Description:
25 to 500 horsepower; 3600 & 1800 RPM’s
250 frame rolled steel construction; 280 frame and larger - cast iron construction
EPAct efficiency
Ball bearings; NEMA design B, code G
230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
Single voltage motors – 12 leads suitable for Y-Delta, PWS, and across the line start
C-Face kits available through 250HP
Exterior red paint
UL listed and CSA certified (UL1004A) and CE marked
Description:
25 to 500 horsepower; 3600 & 1800 RPM’s
250 frame rolled steel construction; 280 frame and larger - cast iron construction
EPAct efficiency
Ball bearings; NEMA design B, code G
230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
Single voltage motors – 12 leads suitable for Y-Delta, PWS, and across the line start
C-Face kits available through 250HP
Exterior red paint
UL listed and CSA certified (UL1004A) and CE marked
Specifications
General Specifications
UPC: | 691720983652 |
Weight: | 217.00 LB |
Packaged Length: | 30.75 IN |
Packaged Width: | 21.75 IN |
Packaged Height: | 18 IN |
Nameplate Specifications
Output HP: | 10 Hp |
Output KW: | 7.5 kW |
Frequency: | 60 Hz |
Voltage: | 230/460 V |
Current: | 24.0/12.0 A |
Speed: | 3525 rpm |
Service Factor: | 1.15 |
Phase: | 3 |
Efficiency: | 90.2 % |
Power Factor: | 87 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | B |
KVA Code: | G |
Frame: | 215T |
Enclosure: | Totally Enclosed Fan Cooled |
Thermal Protection: | No |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6307 |
Opp Drive End Bearing Size: | 6208 |
UL: | Recognized |
CSA: | Y |
CE: | Y |
IP Code: | 43 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Squirrel Cage Induction Run |
Starting Method: | Across The Line |
Poles: | 2 |
Rotation: | Reversible |
Resistance Main: | .945 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Cast Iron |
Shaft Type: | T |
Overall Length: | 22.63 in |
Frame Length: | 9.13 in |
Shaft Diameter: | 1.375 in |
Shaft Extension: | 3.38 in |
Assembly/Box Mounting: | F1/F2 CAPABLE |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL