LM80100 - Leeson 200 HP Fire Pump Motor, 3 phase, 1800 RPM, 460 V, 445T Frame, TEFC - LM80100
- Brand: Regal
- Product Code: LM80100
Description:
3 to 450 horsepower
3600 & 1800 RPM’s; EPAct efficiency
Ball bearings; NEMA design B, code G
230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
Single voltage motors – 12 leads suitable for Y-Delta, PWS, and across the line start
UL listed and CSA certified (UL1004A) and CE marked
C-Face kits available through 250HP
Description:
3 to 450 horsepower
3600 & 1800 RPM’s; EPAct efficiency
Ball bearings; NEMA design B, code G
230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
Single voltage motors – 12 leads suitable for Y-Delta, PWS, and across the line start
UL listed and CSA certified (UL1004A) and CE marked
C-Face kits available through 250HP
Specifications
General Specifications
UPC: | 691720983768 |
Weight: | 2,311.00 LB |
Packaged Length: | 56 IN |
Packaged Width: | 46 IN |
Packaged Height: | 30.85 IN |
Nameplate Specifications
Output HP: | 200 Hp |
Output KW: | 149.0 kW |
Frequency: | 60 Hz |
Voltage: | 460 V |
Current: | 224.0 A |
Speed: | 1785 rpm |
Service Factor: | 1.15 |
Phase: | 3 |
Efficiency: | 95 % |
Power Factor: | 88 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | B |
KVA Code: | G |
Frame: | 445T |
Enclosure: | Totally Enclosed Fan Cooled |
Thermal Protection: | No |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6318 |
Opp Drive End Bearing Size: | 6316 |
UL: | No |
CSA: | Y |
CE: | Y |
IP Code: | 43 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Squirrel Cage Induction Run |
Starting Method: | Part Wdg Start & Wye Start Delta Run |
Poles: | 4 |
Rotation: | Reversible |
Resistance Main: | .02 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Cast Iron |
Shaft Type: | T |
Overall Length: | 43.35 in |
Frame Length: | 20.25 in |
Shaft Diameter: | 3.375 in |
Shaft Extension: | 8.5 in |
Assembly/Box Mounting: | F1/F2 CAPABLE |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL