141275.00 - Leeson 10 HP Washdown Motor, 3 phase, 3600 RPM, 230/460 V, 215JM Frame, TEFC - 141275.00
- Brand: Regal
- Product Code: 141275.00
Description:
All exterior components are 300-series stainless steel
End shields are O-ring sealed to the frame
Double lip shaft seals on both ends of TEFC motors
Removable hydrophobic breathers in opposite shaft end bell and conduit box
Double-sealed bearings are pre-lubricated
Interior coatings applied to rotor and stator
Windings are immersed and cured in polyester insulating varnish
Full fact nameplate etched in frame
UL recognized
Description:
All exterior components are 300-series stainless steel
End shields are O-ring sealed to the frame
Double lip shaft seals on both ends of TEFC motors
Removable hydrophobic breathers in opposite shaft end bell and conduit box
Double-sealed bearings are pre-lubricated
Interior coatings applied to rotor and stator
Windings are immersed and cured in polyester insulating varnish
Full fact nameplate etched in frame
UL recognized
Specifications
General Specifications
UPC: | 691720053218 |
Weight: | 182.00 LB |
Packaged Length: | 22.63 IN |
Packaged Width: | 16.13 IN |
Packaged Height: | 14.25 IN |
Nameplate Specifications
Output HP: | 10 Hp |
Output KW: | 7.5 kW |
Frequency: | 60 Hz |
Voltage: | 230/460 V |
Current: | 23.6/11.8 A |
Speed: | 3525 rpm |
Service Factor: | 1.15 |
Phase: | 3 |
Efficiency: | 90.2 % |
Power Factor: | 87.9 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | B |
KVA Code: | H |
Frame: | 215JM |
Enclosure: | Totally Enclosed Fan Cooled |
Thermal Protection: | No |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6209 |
Opp Drive End Bearing Size: | 6207 |
UL: | Recognized |
CSA: | Y |
CE: | Y |
IP Code: | 43 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Squirrel Cage Induction Run |
Starting Method: | Across The Line |
Poles: | 2 |
Rotation: | Reversible |
Resistance Main: | .8 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Stainless Steel |
Shaft Type: | JM |
Overall Length: | 19.81 in |
Frame Length: | 12.00 in |
Shaft Diameter: | 1.250 in |
Shaft Extension: | 4.25 in |
Assembly/Box Mounting: | F1 Only |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL