LM24778 - Leeson 3 HP Crop Dryer Motor, 1 phase, 3600 RPM, 230 V, 145TZ Frame, ODP - LM24778
- Brand: Regal
- Product Code: LM24778
Description:
UL recognized component listing and CSA certification ensures the product is safe for use.
High starting torque on start-up, to achieve a higher starting load required in crop drying applications.
Sealed bearings shut out contaminants that lead to bearing failure.
Epoxy coating maintains superior resistance to corrosion.
Rodent screen protects vent openings.
Description:
UL recognized component listing and CSA certification ensures the product is safe for use.
High starting torque on start-up, to achieve a higher starting load required in crop drying applications.
Sealed bearings shut out contaminants that lead to bearing failure.
Epoxy coating maintains superior resistance to corrosion.
Rodent screen protects vent openings.
Specifications
General Specifications
UPC: | 691720345252 |
Weight: | 43.00 LB |
Packaged Length: | 16.38 IN |
Packaged Width: | 10.5 IN |
Packaged Height: | 8.12 IN |
Nameplate Specifications
Output HP: | 3 Hp |
Output KW: | 2.2 kW |
Frequency: | 60 Hz |
Voltage: | 230 V |
Current: | 12.5 A |
Speed: | 3450 rpm |
Service Factor: | 1.5 |
Phase: | 1 |
Efficiency: | 82.2 % |
Power Factor: | 95.1 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | L |
KVA Code: | E |
Frame: | 145TZ |
Enclosure: | Drip Proof |
Thermal Protection: | Automatic |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 205 |
Opp Drive End Bearing Size: | 203 |
UL: | No |
CSA: | Y |
CE: | Y |
IP Code: | 12 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Capacitor Start Capacitor Run |
Starting Method: | Across The Line |
Poles: | 2 |
Rotation: | Selective Counterclockwise |
Resistance Main: | 0 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Rolled Steel |
Shaft Type: | Single Special Extension |
Overall Length: | 13.74 in |
Frame Length: | 9.06 in |
Shaft Diameter: | 0.875 in |
Shaft Extension: | 3 in |
Assembly/Box Mounting: | F1 ONLY |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL