LM80119 - Leeson 50 HP Fire Pump Motor, 3 phase, 1800 RPM, 200/400 V, 326TS Frame, ODP - LM80119
- Brand: Regal
- Product Code: LM80119
Description:
25 to 500 horsepower; 3600 & 1800 RPM’s
250 frame rolled steel construction; 280 frame and larger - cast iron construction
EPAct efficiency
Ball bearings; NEMA design B, code G
230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
C-Face kits available through 250HP
Exterior red paint
UL listed and CSA certified (UL1004A) and CE marked
Description:
25 to 500 horsepower; 3600 & 1800 RPM’s
250 frame rolled steel construction; 280 frame and larger - cast iron construction
EPAct efficiency
Ball bearings; NEMA design B, code G
230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
C-Face kits available through 250HP
Exterior red paint
UL listed and CSA certified (UL1004A) and CE marked
Specifications
General Specifications
UPC: | 691720983836 |
Weight: | 515.00 LB |
Packaged Length: | 39 IN |
Packaged Width: | 32.25 IN |
Packaged Height: | 23.42 IN |
Nameplate Specifications
Output HP: | 50 Hp |
Output KW: | 37.0 kW |
Frequency: | 60 Hz |
Voltage: | 200/400 V |
Current: | 142.0/70.5 A |
Speed: | 1770 rpm |
Service Factor: | 1.15 |
Phase: | 3 |
Efficiency: | 93 % |
Power Factor: | 81.5 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | B |
KVA Code: | G |
Frame: | 326TS |
Enclosure: | Drip Proof |
Thermal Protection: | No |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6312 |
Opp Drive End Bearing Size: | 6311 |
UL: | No |
CSA: | Y |
CE: | Y |
IP Code: | 12 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Squirrel Cage Induction Run |
Starting Method: | Wye Start Delta Run |
Poles: | 4 |
Rotation: | Reversible |
Resistance Main: | .125 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Cast Iron |
Shaft Type: | TS |
Overall Length: | 26.00 in |
Frame Length: | 15.12 in |
Shaft Diameter: | 1.875 in |
Shaft Extension: | 3.75 in |
Assembly/Box Mounting: | F1/F2 CAPABLE |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL