101172155 - SE-P40-1250 VERP.GUMMIPROF.1,25M
- Brand: Schmersal
- Product Code: 101172155
Description: Product type description:SE-P40 (1)-(2)-(3)(1)withoutUncoated profileCCoated profile (2)withoutMaterial: EPDM, 65 Shore ANBRMaterial: Perbunan® NBR(3)1250Length 1250 mm2500Length 2500 mm5000Length 5000 mm (for uncoated profile only)10000Length 10000 mm (for uncoated profile only)
Description: Product type description:SE-P40 (1)-(2)-(3)(1)withoutUncoated profileCCoated profile (2)withoutMaterial: EPDM, 65 Shore ANBRMaterial: Perbunan® NBR(3)1250Length 1250 mm2500Length 2500 mm5000Length 5000 mm (for uncoated profile only)10000Length 10000 mm (for uncoated profile only)
Productfeatures
- Dirt and moisture in the profile are to a great extent compensated
- Insensitive to environmental conditions
- approx. 40 mm high
Data
Ordering data
Product type description | SE-P40-1250 VERP.GUMMIPROF.1,25M |
Article number (order number) | 101172155 |
EAN (European Article Number) | 4030661300184 |
eCl@ss number, version 9.0 | 27-27-06-90 |
eCl@ss number, version 11.0 | 27-27-06-90 |
eCl@ss number, version 12.0 | 27-27-06-90 |
ETIM number, version 7.0 | EC002887 |
ETIM number, version 6.0 | EC002887 |
Note (Ordering data) | A switch strip system is assembled from individual components. The components must be ordered separately. Example: Rubber profile, SE-P40-1250 Al profile, SE-AL 10-1250 Transmitter/receiver SE-SET Safety control module, SE-304 C Optional: End plugs SE-T40; sticker SE-G8406 Other accessories |
General data
Standards | EN ISO 13850 |
Resistance against permanent deformation | Good |
Material resistance (acids) | Good |
Material of the rubber profile | EPDM, 65 Shore A |
Note (Material of the rubber profile) | International abbreviation: EPDM, 65 Shore A Chemical name : Ethylene-propylene terpolymer |
Gross weight | 435 g |
Mechanical data
Mechanical life, minimum | 20,000,000 Operations |
Mechanical data - Dimensions
Length | 1,250 mm |
Width | 25 mm |
Height, approx. | 38 mm |
Ambient conditions
Degree of protection | IP67 |
Material temperature resistance (short-term), minimum | -50 °C |
Material temperature resistance (short-term), maximum | +170 °C |
Material temperature resistance (long-term), minimum | -30 °C |
Material temperature resistance (long-term), maximum | +140 °C |
Note
Note (General) | If a higher resistance is required, choose safety edge profiles with 20 µm plastic coating. The coating must be submitted to low mechanical loads only. |
Notes - Chemical resistance
Material resistance (fuel) | Low |
Material resistance (solvents) | low to satisfactory |
Material resistance (oil) | Low |
Material resistance (ozone) | Excellent |
Material resistance, (rebound elasticity at 20 C) | Good |
Material resistance (weather) | Excellent |
Mounting and wiring instructions
SE-T40 / SE-TC40 / SE-T70 / SE-TC70
Operating instructions and Declaration of conformity
SE-P40 / SE-P70
TÜV certification
SE 414 / SE 421 / SE 443 / SE 714 / SE 721 / SE 743
Force-travel diagram
SE-P40 / SE-P70
TraceParts