Productfeatures
- Pre-wired cable right, 2
- Snap action 1 Normally open contact (NO) / 1 Opener (NC)
- only for positioning tasks
- Thermoplastic enclosure
- Symmetric enclosure
- Lever angle adjustable in 15° steps
- Protection class IP66, IP67
- Actuator heads can be repositioned by 8 x 45°
- Design to EN 50047
Data
Ordering data
Product type description | PS116-Z11-LR200-J200 |
Article number (order number) | 103006581 |
EAN (European Article Number) | 4030661442303 |
eCl@ss number, version 9.0 | 27-27-06-01 |
eCl@ss number, version 11.0 | 27-27-06-01 |
eCl@ss number, version 12.0 | 27-27-06-01 |
ETIM number, version 7.0 | EC000030 |
ETIM number, version 6.0 | EC000030 |
Approvals - Standards
Certificates | cULus CCC EAC |
General data
Standards | IEC 60947-5-1 |
Terminal (mechanical) | right |
Housing construction form | Norm construction design |
Enclosure material | Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated |
Material of the contacts, electrical | Silver |
Gross weight | 240 g |
General data - Features
Number of auxiliary contacts | 1 |
Number of safety contacts | 1 |
Safety classification - Safety outputs
B | 20,000,000 Operations |
Mechanical data
Actuating element | Rod lever J200 |
Mechanical life, minimum | 10,000,000 Operations |
Positive break force, minimum | 40 N |
Actuating speed, minimum | 687 mm/min |
Actuating speed, maximum | 1 m/s |
Actuating torque, minimum | 0.2 Nm |
Positive break torque | 0.6 Nm |
Mechanical data - Connection technique
Type of connection | Cable, 4-pole |
Length of cable | 2 m |
Wire cross-section | 0.5 mm |
Cable type | LiYY |
Mechanical data - Dimensions
Length x Width x Height | Height of sensor: 169 mm (rod centre) |
Length of sensor | 16.6 mm |
Width of sensor | 31 mm |
Diameter of the Rod | 6 mm |
Length of the lever | 200 mm |
Ambient conditions
Degree of protection | IP67 IP66 |
Ambient temperature, minimum | -30 °C |
Ambient temperature, maximum | +80 °C |
Ambient conditions - Insulation values
Rated insulation voltage U | 300 V |
Rated impulse withstand voltage U | 4 kV |
Operating instructions (supplementary sheet/quick guide)
Position switch PS116
UL Certificate
(415.8 kB, 08/01/2019)
EC Declaration of conformity
PS116 , PS215 , PS216 , PS226 , PS315 , PS316
UKCA certificate
(98.3 kB, 10/08/2021, A)
Brochure
Position detection with system
TraceParts
CADENAS