101191703 - BNS-B20-02ZG-H-LST 2,0M
- Brand: Schmersal
- Product Code: 101191703
- Thermoplastic enclosure
- Non-contact safety switch
- Does not protrude into the door opening
- 119,5 mm x 140 mm x 43,3 mm
- Substitutes door-handle and safety switch, no further door fittings required
- Modern and symmetric design
- Tamper-proof because of integral coded safety sensor
- Ergonomic operation
- Suitable for hinged and sliding guards
- No protruding actuator
- Simple mounting with 4 Screws
Data
Ordering data
Product type description | BNS-B20-02ZG-H-LST 2,0M |
Article number (order number) | 101191703 |
EAN (European Article Number) | 4030661351889 |
eCl@ss number, version 9.0 | 27-27-24-02 |
eCl@ss number, version 11.0 | 27-27-24-02 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
Approvals - Standards
Certificates | TÜV cULus EAC |
General data
Standards | BG-GS-ET-14 IEC 60947-5-3 |
Coding level according to ISO 14119 | Low |
Working principle | Magnetic drive |
Installation conditions (mechanical) | quasi-flush |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 188 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of openers | 2 |
Number of safety contacts | 2 |
Number of cable wires | 4 |
Safety classification - Safety outputs
B | 25,000,000 Operations |
Mechanical data
Actuating element | Magnet |
Latching force | 100 N |
Door weight, Sliding guard, maximal | 3 kg |
Door weight, Hinged guard, maximal | 5 kg |
Mechanical data - Switching distances according EN IEC 60947-5-3
Assured switching distance "ON" S | 0 mm |
Assured switching distance "OFF" S | 22 mm |
Mechanical data - Connection technique
Type of connection | Connecting cable with M12 connector, straight, 4-pole |
Length of cable | 2 m |
Wire cross-section | 0.25 mm |
Material of the Cable mantle | PVC |
Mechanical data - Dimensions
Length of sensor | 43.3 mm |
Width of sensor | 119.5 mm |
Height of sensor | 140 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +70 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Electrical data
Switching voltage, maximum | 24 VDC |
Switching current, maximum | 0.01 A |
Switching capacity, maximum | 0.2 W |
Switching frequency, maximum | 5 Hz |
Status indication
Note (Integral System Diagnostics, status ) | The LED is illuminated when the guard is closed. |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BNS-B20-B01 |
Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Note
Note (General) | Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical. Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. |


