101216089 - BNS 36-02Z-R 6,0M
- Brand: Schmersal
- Product Code: 101216089
Description: Product type description:BNS 36-(1)(2)Z(3)-(4)-(5)(1)111 NO contacts/1 NC contact022 NC contact(2)withoutwith diagnostic output/011 NC contact(3)withoutwithout LED switching conditions displayGwith LED switching conditions display(4)withoutPre-wired cableSTwith connector(5)LDoor hinge on left-hand sideRDoor hinge on right-hand side
Description: Product type description:BNS 36-(1)(2)Z(3)-(4)-(5)(1)111 NO contacts/1 NC contact022 NC contact(2)withoutwith diagnostic output/011 NC contact(3)withoutwithout LED switching conditions displayGwith LED switching conditions display(4)withoutPre-wired cableSTwith connector(5)LDoor hinge on left-hand sideRDoor hinge on right-hand side
Productfeatures
- Thermoplastic enclosure
- Long life
- no mechanical wear
- 88 mm x 25 mm x 13 mm
- Concealed mounting possible
- Insensitive to transverse misalignment
- Insensitive to soiling
Data
Ordering data
Product type description | BNS 36-02Z-R 6,0M |
Article number (order number) | 101216089 |
EAN (European Article Number) | 4030661405377 |
eCl@ss number, version 9.0 | 27-27-24-02 |
eCl@ss number, version 11.0 | 27-27-24-02 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
Approvals - Standards
Certificates | TÜV BG cULus EAC |
General data
Standards | BG-GS-ET-14 IEC 60947-5-3 |
Coding level according to ISO 14119 | Low |
Working principle | Magnetic drive |
Installation conditions (mechanical) | quasi-flush |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 265 g |
General data - Features
Number of openers | 2 |
Number of safety contacts | 2 |
Number of cable wires | 4 |
Safety classification - Safety outputs
B | 25,000,000 Operations |
Mechanical data
Actuating element | Magnet |
Direction of motion | Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
Note (Switching distance Sn) | Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
Assured switching distance "ON" S | 7 mm |
Assured switching distance "OFF" S | 17 mm |
Mechanical data - Connection technique
Type of connection | Cable |
Length of cable | 6 m |
Wire cross-section | 0.25 mm |
Wire cross-section | 23 AWG |
Material of the Cable mantle | PVC |
Mechanical data - Dimensions
Length of sensor | 13 mm |
Width of sensor | 88 mm |
Height of sensor | 25 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +70 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Electrical data
Voltage type | DC (direct current) |
Switching current, maximum | 0.4 A |
Switching capacity, maximum | 10 W |
Switching frequency, maximum | 5 Hz |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BPS 36-2 |
Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Operating instructions and Declaration of conformity
BNS 36
UL Certificate
(385.0 kB, 08/01/2019)
SISTEMA-VDMA library
(131.9 kB, 12/09/2021)
TraceParts
CADENAS
SISTEMA