103006685 - RSS16-SD-ST8H
- Brand: Schmersal
- Product Code: 103006685
- Universal coding with RFID technology
- 1 x connector plug M12, 8-pole
- Series-wiring up to 31 components
- without latching
- Thermoplastic enclosure
- RFID-technology for needs-based protection against tampering
- 3 different directions of actuation
- Door stop with magnetic latching
- Connection terminal or plug connection
- Suitable for series-wiring
Data
Ordering data
Product type description | RSS16-SD-ST8H |
Article number (order number) | 103006685 |
EAN (European Article Number) | 4030661456959 |
eCl@ss number, version 9.0 | 27-27-24-03 |
eCl@ss number, version 11.0 | 27-27-24-03 |
ETIM number, version 7.0 | EC000030 |
ETIM number, version 6.0 | EC000030 |
Approvals - Standards
Certificates | TÜV cULus EAC FCC IC |
General data
Standards | IEC 60947-5-3 |
Coding | Universal coding |
Coding level according to ISO 14119 | Low |
Working principle | RFID |
Housing construction form | Block |
Installation conditions (mechanical) | not flush |
Sensor topology | Sensor for series wiring |
Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
Active area | Glass-fibre, reinforced thermoplastic |
Gross weight | 250 g |
Time to readiness, maximum | 2,000 ms |
Reaction time, maximum | 100 ms |
Duration of risk, maximum | 200 ms |
General data - Features
Serial diagnostics | Yes |
Diagnostic output | Yes |
Short circuit detection | Yes |
Cross-circuit detection | Yes |
Series-wiring | Yes |
Safety functions | Yes |
Cascadable | Yes |
Integral system diagnostics, status | Yes |
Number of LEDs | 2 |
Number of semi-conductor outputs with signaling function | 1 |
Number of fail-safe digital outputs | 2 |
Number of series-wiring of sensors | 31 |
Mechanical data
Actuating panels | front side rear from head |
Active area | lateral front side cover-side |
Hysteresis (Switching distance), maximum | 2 mm |
Repeat accuracy R R | 0.5 mm |
Mounting | 2 x M5, Cylinder head screw |
Tightening torque of nuts, maximum | 2 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance | 15 mm |
Assured switching distance "ON" S | 12 mm |
Assured switching distance "OFF" S | 30 mm |
Mechanical data - Connection technique
Type of connection | Connector M12, 8-pole |
Note | The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current |
Mechanical data - Dimensions
Length of sensor | 91 mm |
Width of sensor | 52 mm |
Height of sensor | 30 mm |
Ambient conditions
Degree of protection | IP65 IP67 IP66 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +85 °C |
Restistance to shock | 30 g / 11 ms |
Protection class | 0 |
Ambient conditions - Insulation values
Rated insulation voltage U | 32 VDC |
Rated impulse withstand voltage U | 0.8 kV |
Overvoltage category | III |
Degree of pollution to VDE 0100 | 3 |
Electrical data
Voltage type | DC (direct current) |
No-load supply current, maximum I | 100 mA |
Rated operating voltage, minimum | 20.4 VDC |
Rated operating voltage, maximum | 26.4 VDC |
Operating current | 2,100 mA |
Required rated short-circuit current to EN 60947-5-1 | 100 A |
Switching frequency, approx. | 1 Hz |
Electrical data - Safety digital outputs
Rated operating current (safety outputs) | 1,000 mA |
Output current, (fail-safe output), maximum | 1 A |
Design of switching elements | p-type |
Voltage drop U | 1 V |
Leakage current I | 0.5 mA |
Voltage, Utilisation category DC-12 | 24 VDC |
Current, Utilisation category DC-12 | 1 A |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 1 A |
Electrical data - Diagnostic outputs
Operating current | 150 mA |
Design of switching elements | p-type |
Voltage drop U | 2 V |
Electrical data - Electromagnetic compatibility (EMC)
Interfering radiation | IEC 61000-6-4 |
EMC rating | IEC 60947-3 |
Status indication
Note (LED switching conditions display) | Multi-coloured LED: Green, Red LED yellow: Operating condition LED green: Supply voltage LED red: Fault |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
