103015815 - AZ201SK-T-1P2P
- Brand: Schmersal
- Product Code: 103015815
Description: Product type description:AZ201(1)-T-(2)(1)SKScrew connectionCCSpring pulley connectionST1Connector M23 x 1, 8+1 poleST2Connector M12 x 1, 8pole(2)1P2P1 serial diagnostic output and 2 p-type safety outputsSD2Pserial diagnostic output and 2 p-type safety outputs
Description: Product type description:AZ201(1)-T-(2)(1)SKScrew connectionCCSpring pulley connectionST1Connector M23 x 1, 8+1 poleST2Connector M12 x 1, 8pole(2)1P2P1 serial diagnostic output and 2 p-type safety outputsSD2Pserial diagnostic output and 2 p-type safety outputs
Productfeatures
- Thermoplastic enclosure
- RFID-technology for needs-based protection against tampering
- Max. length of the sensor chain 200 m
- Self-monitoring series-wiring
- 3 LEDs to show operating conditions
- Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
- Suitable for hinged and sliding guards
- Intelligent diagnosis
Data
Ordering data
Product type description | AZ201SK-T-1P2P |
Article number (order number) | 103015815 |
EAN (European Article Number) | 4030661504292 |
eCl@ss number, version 9.0 | 27-27-26-02 |
eCl@ss number, version 11.0 | 27-27-26-02 |
eCl@ss number, version 12.0 | 27-27-26-02 |
ETIM number, version 7.0 | EC002592 |
ETIM number, version 6.0 | EC002592 |
Approvals - Standards
Certificates | TÜV cULus EAC FCC IC |
General data
Standards | EN ISO 13849-1 EN ISO 14119 IEC 60947-5-1 IEC 60947-5-3 IEC 61508 IEC 62061 |
Coding | Universal coding |
Coding level according to ISO 14119 | Low |
Working principle | RFID, 125 kHz |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 403.8 g |
Time to readiness, maximum | 4,000 ms |
Duration of risk, maximum | 200 ms |
Reaction time, switching off safety outputs via actuator, maximum | 100 ms |
Reaction time, switching off safety outputs via safety inputs, maximum | 0.5 ms |
General data - Features
Short circuit detection | Yes |
Cross-circuit detection | Yes |
Series-wiring | Yes |
Safety functions | Yes |
Integral system diagnostics, status | Yes |
Number of safety contacts | 2 |
Mechanical data
Mechanical life, minimum | 1,000,000 Operations |
Latching force | 30 N |
Actuating speed, maximum | 0.2 m/s |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, minimum | 0.25 mm² |
Cable section, maximum | 1.5 mm² |
Note (Cable section) | All indications including the conductor ferrules. |
Wire cross-section, minimum | 23 AWG |
Wire cross-section, maximum | 15 AWG |
Mechanical data - Dimensions
Length of sensor | 50 mm |
Width of sensor | 40 mm |
Height of sensor | 220 mm |
Ambient conditions
Degree of protection | IP67 IP66 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +85 °C |
Relative humidity, minimum | 30 % |
Relative humidity, maximum | 95 % |
Note (Relative humidity) | non-condensing |
Resistance to vibration to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm |
Restistance to shock | 30 g / 11 ms |
Protection class | III |
Ambient conditions - Insulation values
Rated insulation voltage U | 32 VDC |
Rated impulse withstand voltage U | 0.8 kV |
Overvoltage category | III |
Degree of pollution to VDE 0100 | 3 |
Electrical data
Operating voltage, minimum | 20.4 VDC |
Operating voltage, maximum | 26.4 VDC |
No-load supply current, maximum I | 100 mA |
Operating current | 700 mA |
Switching frequency, approx. | 1 Hz |
Electrical data - Safety digital inputs
Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
Classification ZVEI CB24I, Sink | C1 |
Classification ZVEI CB24I, Source | C1 C2 C3 |
Electrical data - Safety digital outputs
Rated operating current (safety outputs) | 250 mA |
Voltage drop U | 4 V |
Leakage current I | 0.5 mA |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.25 A |
Classification ZVEI CB24I, Source | C2 |
Classification ZVEI CB24I, Sink | C1 C2 |
Electrical data - Diagnostic outputs
Operating current | 50 mA |
Voltage drop U | 4 V |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.05 A |
Status indication
Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Operating instructions and Declaration of conformity
AZ201
TÜV certification
AZ201 / AZM201
UL Certificate
(378.9 kB, 08/01/2019)
SISTEMA-VDMA library
(131.9 kB, 12/09/2021)
SISTEMA