Productfeatures
- 2 cable entries
- additional nameplate with date of manufacture in the cover
- Metal enclosure
- 4 Contacts
- 118 mm x 174 mm x 64 mm
Data
Ordering data
Product type description | MSP 452-11/11Y-2186 |
Article number (order number) | 101127983 |
EAN (European Article Number) | 4030661031873 |
eCl@ss number, version 9.0 | 27-27-06-01 |
eCl@ss number, version 11.0 | 27-27-06-01 |
eCl@ss number, version 12.0 | 27-27-06-01 |
ETIM number, version 7.0 | EC000030 |
ETIM number, version 6.0 | EC000030 |
General data
Standards | EN 60947-5-1 |
Working principle | mechanical |
Slide form | Curvature |
Enclosure material | Grey cast iron, galvanised |
Enclosure coating material | painted |
Gross weight | 1,700 g |
General data - Features
Number of openers | 2 |
Number of shutters | 1 |
Mechanical data
Actuating element | Plunger |
Mechanical life, minimum | 3,000,000 Operations |
Contact opening | 2 x 0.5 mm |
Actuating torque | 0.2 Nm |
Mechanical data - Connection technique
Type of connection | Screw terminals M20 x 1.5 |
Cable section, minimum | 1.5 mm² |
Cable section, maximum | 2.5 mm² |
Note (Cable section) | All indications including the conductor ferrules. |
Wire cross-section | 12 AWG |
Mechanical data - Dimensions
Length of sensor | 64 mm |
Width of sensor | 118 mm |
Height of sensor | 174 mm |
Diameter of the Plunger | 10 mm |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -30 °C |
Ambient temperature, maximum | +90 °C |
Ambient conditions - Insulation values
Rated insulation voltage U | 250 V |
Rated impulse withstand voltage U | 4 kV |
Electrical data
Thermal test current | 6 A |
Utilisation category AC-15 | 230 VAC |
Utilisation category AC-15 | 2.5 A |
Switching principle | Snap switch element |
Bounce duration, maximum | 43,221 ms |
Switchover time, maximum | 10 ms |
Note
Note (General) | This rotating spindle limit switch with snap-action insert is only fit for use in normal to average operating conditions, e.g. for machine tools, cranes and conveyors. Protection class IP 65 to IEC/EN 60529. By reversing the contacts, the spindle revolutions can be set between 4 and 55 revolutions The run-out towards each side is at least 5 revolutions. |
Operating instructions and Declaration of conformity
Position and limit switches
EC Declaration of conformity
T/M 422 T/M 441 T/M 452 T/M 461 T/M 470 M 442 T 420