103038715 - IFOD 8-300-10/01
- Brand: Schmersal
- Product Code: 103038715
- Thermoplastic enclosure
- AC 2-wire
- Wiring compartment can be turned 180°
- Design M30
- Wiring compartment
Data
Ordering data
Product type description | IFOD 8-300-10/01 |
Article number (order number) | 103038715 |
EAN (European Article Number) | 4030661545967 |
eCl@ss number, version 9.0 | 27-27-09-03 |
eCl@ss number, version 11.0 | 27-27-09-03 |
eCl@ss number, version 12.0 | 27-27-09-03 |
ETIM number, version 7.0 | EC001821 |
ETIM number, version 6.0 | EC001821 |
General data
Standards | DIN VDE 0660-208 IEC/EN 60947-5-2 |
Housing construction form | Cylinder, thread |
Enclosure material | Plastic |
Active area | Plastic |
Material of the nuts | Plastic |
Material of the washer | Perbunan |
Detection range, maximum S | 800 mm |
Gross weight | 72.2 g |
General data - Features
Integral system diagnostics, status | Yes |
Number of cable wires | 2 |
Mechanical data
Tightening torque of nuts, maximum | 4 Nm |
Mechanical data - Connection technique
Type of connection | Screw connection |
Cable section, maximum | 2 x 1.5 mm² |
Wire cross-section | 15 AWG |
Mechanical data - Dimensions
ISO thread of the sensor | M30 |
width across flats | 36 BK |
Length of sensor | 118 mm |
Width of sensor | 46 mm |
Height of sensor | 46 mm |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -5 °C |
Ambient temperature, maximum | +70 °C |
Protection class | II |
Ambient conditions - Insulation values
Rated impulse withstand voltage U | 10 kV |
Electrical data
Voltage type | AC (alternating current) |
Rated supply frequency, minimum | 45 Hz |
Rated supply frequency, maximum | 65 Hz |
Operating voltage, minimum | 15 V |
Operating voltage, maximum | 250 V |
Operating current, minimum | 10 mA |
Operating current | 500 mA |
Switching element | NO contact or NC contact |
Protection circuit integrated | inductive interference protection |
Switching frequency, approx. | 10 Hz |
Electrical data - Digital Output
Voltage drop U | 7 V |
Current at Voltage drop U | 0.5 A |
Design of switching elements | Two-wire |
Leakage current, maximum I | 3 mA |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
