101211156 - MZM 100 B ST2-SD2PRE-A
- Brand: Schmersal
- Product Code: 101211156
Description: Product type description:MZM 100(1)(2)(3)(4)(5)(1)withoutSolenoid interlock monitoredBActuator monitored(2)ST2Connector plug M12, 8-poleSTConnector plug M23, 8+1-pole(3)1P2P1 p-type diagnostic output and 2 p-type safety outputs (only in connection with Solenoid interlock monitored)1P2PWserial diagnostic output and 2 p-type safety outputs(4)withoutelectrically adjustable latching force 30 … 100 N(5)
Description: Product type description:MZM 100(1)(2)(3)(4)(5)(1)withoutSolenoid interlock monitoredBActuator monitored(2)ST2Connector plug M12, 8-poleSTConnector plug M23, 8+1-pole(3)1P2P1 p-type diagnostic output and 2 p-type safety outputs (only in connection with Solenoid interlock monitored)1P2PWserial diagnostic output and 2 p-type safety outputs(4)withoutelectrically adjustable latching force 30 … 100 N(5)
Productfeatures
- Actuator monitored
- Connector M12, 8-pole
- Power to lock
- serial diagnostic output
- Automatic latching
- Solenoid interlocks (for the protection of man) with innovating and unique operating principle
- 40 mm x 179 mm x 40 mm
- Electronic contact-free, coded system
- Thermoplastic enclosure
- Max. length of the sensor chain 200 m
- 3 LEDs to show operating conditions
- Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
- Intelligent diagnosis
- Self-monitoring series-wiring
- Patented
Data
Ordering data
Product type description | MZM 100 B ST2-SD2PRE-A |
Article number (order number) | 101211156 |
EAN (European Article Number) | 4030661389424 |
eCl@ss number, version 9.0 | 27-27-26-03 |
eCl@ss number, version 11.0 | 27-27-26-03 |
eCl@ss number, version 12.0 | 27-27-26-03 |
ETIM number, version 7.0 | EC002593 |
ETIM number, version 6.0 | EC002593 |
Approvals - Standards
Certificates | TÜV cULus EAC |
General data
Standards | EN 60947-5-3 EN ISO 13849-1 EN ISO 14119 IEC 61508 |
Coding | Universal coding |
Coding level according to ISO 14119 | Low |
Working principle | inductive |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 620 g |
Time to readiness, maximum | 4,000 ms |
Reaction time, maximum | 150 ms |
Duration of risk, maximum | 150 ms |
General data - Features
Power to lock | Yes |
Actuator monitored | Yes |
Serial diagnostics | Yes |
Latching | Yes |
Short circuit detection | Yes |
Cross-circuit detection | Yes |
Series-wiring | Yes |
Safety functions | Yes |
Integral system diagnostics, status | Yes |
Number of safety contacts | 2 |
Number of series-wiring of sensors | 31 |
Safety classification - Interlocking function
Performance Level, up to | e |
Category | 4 |
PFH value | 3.54 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in | 3 |
Mission time | 20 Year(s) |
Mechanical data
Mechanical life, minimum | 1,000,000 Operations |
Note (Mechanical life) | Actuating speed < 0.5 m/s Operations for door weights ≤ 5 kg |
Holding force, typically | 750 N |
Holding force, guaranteed | 500 N |
Latching force, minimum | 30 N |
Latching force, maximum | 100 N |
Mechanical data - Connection technique
Type of connection | Connector M12, 8-pole |
Mechanical data - Dimensions
Length of sensor | 40 mm |
Width of sensor | 40 mm |
Height of sensor | 179 mm |
Ambient conditions
Degree of protection | IP65 IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +55 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +70 °C |
Relative humidity, minimum | 30 % |
Relative humidity, maximum | 95 % |
Note (Relative humidity) | non-condensing non-icing |
Resistance to vibration to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm |
Restistance to shock | 30 g / 11 ms |
Protection class | III |
Ambient conditions - Insulation values
Rated insulation voltage U | 32 VDC |
Rated impulse withstand voltage U | 0.8 kV |
Overvoltage category | III |
Degree of pollution to VDE 0100 | 3 |
Electrical data
Operating voltage, minimum | 20.4 VDC |
Operating voltage, maximum | 26.4 VDC |
No-load supply current, maximum I | 600 mA |
Operating current | 50 mA |
Required rated short-circuit current to EN 60947-5-1 | 100 A |
Note | Cable length and cable section alter the voltage drop depending on the output current |
Switching frequency, maximum | 1 Hz |
Electrical data - Magnet control
Switching thresholds | -3 V … 5 V (Low) 15 V … 30 V (High) |
Classification ZVEI CB24I, Sink | C0 |
Classification ZVEI CB24I, Source | C1 C2 C3 |
Electrical data - Safety digital inputs
Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
Classification ZVEI CB24I, Sink | C1 |
Classification ZVEI CB24I, Source | C1 C2 C3 |
Electrical data - Safety digital outputs
Rated operating current (safety outputs) | 250 mA |
Voltage drop U | 1 V |
Leakage current I | 0.5 mA |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.25 A |
Classification ZVEI CB24I, Source | C1 |
Classification ZVEI CB24I, Sink | C1 |
Electrical data - Diagnostic outputs
Voltage drop U | 2 V |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 0.05 A |
Status indication
Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
Pin assignment
PIN 1 | A1 Supply voltage UB |
PIN 2 | X1 Safety input 1 |
PIN 3 | A2 GND |
PIN 4 | Y1 Safety output 1 |
PIN 5 | OUT serial diagnostic output |
PIN 6 | X2 Safety input 2 |
PIN 7 | Y2 Safety output 2 |
PIN 8 | IN serial diagnostic input |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | MZM 100-B1.1 |
Operating instructions and Declaration of conformity
MZM 100 / MZM 100 B
UL Certificate
(413.4 kB, 08/01/2019)
Brochure
Electronic Safety Sensors and Solenoid Interlocks
SISTEMA-VDMA library
(131.9 kB, 12/09/2021)
TraceParts
ePLAN
CADENAS
SISTEMA