2604-3101 - PCB terminal block; Push-in CAGE CLAMP with operating lever; AWG 24 - 12; Pin spacing 5 mm; 1-pole; top entry; gray
- Brand: Wago
- Product Code: 2604-3101
Description: PCB terminal blocks with lever-actuated Push-in CAGE CLAMP® connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously – convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry
Description: PCB terminal blocks with lever-actuated Push-in CAGE CLAMP® connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously – convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry
- Available Quantity: 0
$1.16
Electrical data
IEC Approvals
Ratings per | IEC/EN 60664-1 |
Rated voltage (III / 3) | 320 |
Rated impulse voltage (III/3) | 4 |
Rated voltage (III/2) | 400 |
Rated impulse voltage (III/2) | 4 |
Nominal voltage (II/2) | 630 |
Rated surge voltage (II/2) | 4 |
Rated current | 32 |
Legend (ratings) | (III / 2) ≙ Overvoltage category III / Pollution degree 2 |
UL Approvals
Approvals per | UL 1059 |
Rated voltage UL (Use Group B) | 300 |
Rated current UL (Use Group B) | 20 |
Rated voltage UL (Use Group D) | 300 |
Rated current UL (Use Group D) | 10 |
CSA Approvals
Approvals per | CSA |
Rated voltage CSA (Use Group B) | 300 |
Rated current CSA (Use Group B) | 20 |
Rated voltage CSA (Use Group D) | 300 |
Rated current CSA (Use Group D) | 5 |
Notes
Note | The inherent stability of a single-pole PCB terminal block is less than that of a multi-pole terminal strip. The customer must therefore ensure that these terminal blocks are protected against excessive mechanical stress (e.g., torsional or bending stress), both when connecting the conductor and during subsequent use, for example by providing additional support, shortly holding the connected conductor and appropriate actuation instructions. |
Variants: | Other pole numbers Direct marking Other colors Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/. |
Connection data
Total number of connection points | 1 |
Total number of potentials | 1 |
Number of connection types | 1 |
Number of levels | 1 |
Physical data
Pin spacing | 5 mm / 0.197 inches |
Width | 7.4 mm / 0.291 inches |
Height | 25.3 mm / 0.996 inches |
Height from the surface | 21.3 mm / 0.839 inches |
Depth | 16.7 mm / 0.657 inches |
Solder pin length | 4 |
Solder pin dimensions | 0.8 x 1 mm |
Drilled hole diameter with tolerance | 1.3 (+0.1) mm |
PCB contact
PCB Contact | THT |
Solder pin arrangement | Over the entire terminal strip (in-line) |
Number of solder pins per potential | 2 |
Material data
Note (material data) | |
Color | gray |
Material group | I |
Insulation material | Polyamide (PA66) |
Flammability class per UL94 | V0 |
Clamping spring material | Chrome-nickel spring steel (CrNi) |
Contact material | Electrolytic copper (ECu) |
Contact plating | Tin |
Actuator color | orange |
Weight | 1.9 |
Environmental requirements
Limit temperature range | -60 … +105 °C |
Additional Information
Technical Section
CAD data
2D/3D Models 2604-3101
PCB Design
Symbol and Footprint 2604-3101
CAE data
ZUKEN Portal 2604-3101
Compliance Search
Environmental Product Compliance 2604-3101