2636-1101/000-004 - PCB terminal block; Push-in CAGE CLAMP; AWG 18 - 4; Pin spacing 10 mm; double pinning; 1-pole; side entry; black
- Brand: Wago
- Product Code: 2636-1101/000-004
Description: PCB terminal strips with Push-in CAGE CLAMP® connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry
Description: PCB terminal strips with Push-in CAGE CLAMP® connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry
- Available Quantity: 0
$4.06
Electrical data
IEC Approvals
Ratings per | IEC/EN 60664-1 |
Rated voltage (III / 3) | 1000 |
Rated impulse voltage (III/3) | 8 |
Rated voltage (III/2) | 1000 |
Rated impulse voltage (III/2) | 8 |
Nominal voltage (II/2) | 1000 |
Rated surge voltage (II/2) | 8 |
Rated current | 76 |
Legend (ratings) | (III / 2) ≙ Overvoltage category III / Pollution degree 2 |
UL Approvals
Approvals per | UL 1059 |
Rated voltage UL (Use Group B) | 600 |
Rated current UL (Use Group B) | 66 |
Rated voltage UL (Use Group C) | 600 |
Rated current UL (Use Group C) | 66 |
CSA Approvals
Approvals per | CSA |
Rated voltage CSA (Use Group B) | 600 |
Rated current CSA (Use Group B) | 66 |
Rated voltage CSA (Use Group C) | 1000 |
Rated current CSA (Use Group C) | 66 |
Notes
Note | The inherent stability of a single-pole PCB terminal block is less than that of a multi-pole terminal strip. The customer must therefore ensure that these terminal blocks are protected against excessive mechanical stress (e.g., torsional or bending stress), both when connecting the conductor and during subsequent use, for example by providing additional support, shortly holding the connected conductor and appropriate actuation instructions. |
Variants: | Other pole numbers Direct marking Other colors Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/. |
Connection data
Total number of connection points | 1 |
Total number of potentials | 1 |
Number of connection types | 1 |
Number of levels | 1 |
Physical data
Pin spacing | 10 mm / 0.394 inch |
Width | 11.6 mm / 0.457 inch |
Height | 32.6 mm / 1.283 inch |
Height from the surface | 28.6 mm / 1.126 inch |
Depth | 29.1 mm / 1.146 inch |
Solder pin length | 4 |
Solder pin dimensions | 1.2 x 1 mm |
Drilled hole diameter with tolerance | 1.7 (+0.1) mm |
Mechanical data
Mounting type | Feed-through mounting |
PCB contact
PCB Contact | THT |
Solder pin arrangement | Over the entire terminal strip (in-line) |
Number of solder pins per potential | 6 |
Material data
Note (material data) | |
Color | black |
Material group | I |
Insulation material | Polyamide (PA66) |
Flammability class per UL94 | V0 |
Clamping spring material | Chrome-nickel spring steel (CrNi) |
Contact material | Electrolytic copper (ECu) |
Contact plating | Tin |
Weight | 9.8 |
Environmental requirements
Limit temperature range | -60 … +105 °C |
Additional Information
Technical Section
CAD data
2D/3D Models 2636-1101/000-004
CAE data
ZUKEN Portal 2636-1101/000-004
Compliance Search
Environmental Product Compliance 2636-1101/000-004